Packages and Binaries:
ipv6toolkit
Included tools:
- addr6: An IPv6 address analysis and manipulation tool.
- flow6: A tool to perform a security asseessment of the IPv6 Flow Label.
- frag6: A tool to perform IPv6 fragmentation-based attacks and to perform a security assessment of a number of fragmentation-related aspects.
- icmp6: A tool to perform attacks based on ICMPv6 error messages.
- jumbo6: A tool to assess potential flaws in the handling of IPv6 Jumbograms.
- na6: A tool to send arbitrary Neighbor Advertisement messages.
- ni6: A tool to send arbitrary ICMPv6 Node Information messages, and assess possible flaws in the processing of such packets.
- ns6: A tool to send arbitrary Neighbor Solicitation messages.
- ra6: A tool to send arbitrary Router Advertisement messages.
- rd6: A tool to send arbitrary ICMPv6 Redirect messages.
- rs6: A tool to send arbitrary Router Solicitation messages.
- scan6: An IPv6 address scanning tool.
- tcp6: A tool to send arbitrary TCP segments and perform a variety of TCP- based attacks.
Installed size: 3.45 MB
How to install: sudo apt install ipv6toolkit
Dependencies:
- ieee-data
- libc6
- libpcap0.8
addr6
An IPv6 address analysis and manipulation tool
root@kali:~# addr6 -h
SI6 Networks' IPv6 Toolkit (current)
addr6: An IPv6 address analysis and conversion tool
usage: addr6 (-i | -a) [-c | -d | -r | -s | -q] [-v] [-h]
OPTIONS:
--address, -a IPv6 address to be decoded
--gen-addr, -A Generate a randmized address for the specified prefix
--stdin, -i Read IPv6 addresses from stdin (standard input)
--print-fixed, -f Print addresses in expanded/fixed format
--print-canonic, -c Print IPv6 addresses in canonic form
--print-reverse, -r Print reversed IPv6 address
--print-decode, -d Decode IPv6 addresses
--print-stats, -s Print statistics about IPv6 addresses
--print-response, -R Print result of address filters
--print-pattern, -x Analyze addresses pattern
--print-uni-preflen, -P Print unique prefixes of a specified length
--block-dup, -q Discard duplicate IPv6 addresses
--block-dup-preflen, -p Discard duplicate prefixes of specified length
--accept, -j Accept IPv6 addresses from specified IPv6 prefix
--accept-type, -b Accept IPv6 addresses of specified type
--accept-scope, -k Accept IPv6 addresses of specified scope
--accept-utype, -w Accept IPv6 unicast addresses of specified type
--accept-iid, -g Accept IPv6 addresses with IIDs of specified type
--block, -J Block IPv6 addresses from specified IPv6 prefix
--block-type, -B Block IPv6 addresses of specified type
--block-scope, -K Block IPv6 addresses of specified scope
--block-utype, -W Block IPv6 unicast addresses of specified type
--block-iid, -G Block IPv6 addresses with IIDs of specified type
--verbose, -v Be verbose
--help, -h Print help for the addr6 tool
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
blackhole6
A tool to find IPv6 blackholes
root@kali:~# man blackhole6
BLACKHOLE6(1) General Commands Manual BLACKHOLE6(1)
NAME
blackhole6 - A tool to find IPv6 blackholes
SYNOPSIS
blackhole6 DESTINATION [PARAMETERS]
DESCRIPTION
blackhole6 is a tool to isolate IPv6 blackholes.
SCRIPTS
get-mx
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the MX for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
MX_RECORD_1
MX_RECORD_2
get-ns
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the NS records for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
MX_RECORD_1
MX_RECORD_2
trace-do8-tcp trace-do8-icmp trace-do256-tcp trace-do256-icmp
These scripts are meant to obtain information about where in the net-
work packets employing IPv6 Extension Headers are being dropped. They
test the path with IPv6 packets containing TCP or ICMPv6 payloads and a
Destination Options Header of 8 or 256 bytes. Based on the obtained re-
sults, the tool can infer what is the system causing the packet drops.
trace-hbh8-tcp trace-hbh8-icmp trace-hbh256-tcp trace-hbh256-icmp
These scripts are meant to obtain information about where in the net-
work packets employing IPv6 Extension Headers are being dropped. They
test the path with IPv6 packets containing TCP or ICMPv6 payloads and a
Hop-by-Hop Options Header of 8 or 256 bytes. Based on the obtained re-
sults, the tool can infer what is the system causing the packet drops.
trace-fh256-tcp trace-fh256-icmp
These scripts are meant to obtain information about where in the net-
work packets employing IPv6 Extension Headers are being dropped. They
test the path with IPv6 packets containing TCP or ICMPv6 payloads re-
sulting in IPv6 fragments of around 256 bytes. Based on the obtained
results, the tool can infer what is the system causing the packet
drops.
trace-do8-tcp-stdin trace-do8-icmp-stdin trace-do256-tcp-stdin trace-
do256-icmp-stdin
These scripts are meant to obtain information about where in the net-
work packets employing IPv6 Extension Headers are being dropped. They
test the path with IPv6 packets containing TCP or ICMPv6 payloads and a
Destination Options Header of 8 or 256 bytes. Based on the obtained re-
sults, the tool can infer what is the system causing the packet drops.
These tools read one IPv6 address per line form standard input and, for
each of those addresses, information is printed with the following syn-
tax:
trace-hbh8-tcp-stdin trace-hbh8-icmp-stdin trace-hbh256-tcp-stdin
trace-hbh256-icmp-stdin
These scripts are meant to obtain information about where in the net-
work packets employing IPv6 Extension Headers are being dropped. They
test the path with IPv6 packets containing TCP or ICMPv6 payloads and a
Hop-by-Hop Options Header of 8 or 256 bytes. Based on the obtained re-
sults, the tool can infer what is the system causing the packet drops.
These tools read one IPv6 address per line form standard input and, for
each of those addresses, information is printed with the following syn-
tax:
trace-fh256-tcp-stdin trace-fh256-icmp-stdin
These scripts are meant to obtain information about where in the net-
work packets employing IPv6 Extension Headers are being dropped. They
test the path with IPv6 packets containing TCP or ICMPv6 payloads re-
sulting in IPv6 fragments of around 256 bytes. Based on the obtained
results, the tool can infer what is the system causing the packet
drops. These tools read one IPv6 address per line form standard input
and, for each of those addresses, information is printed with the fol-
lowing syntax:
-h, --help
Print help information for the scan6 tool.
EXAMPLES
The following sections illustrate typical use cases of the script6
tool.
Example #1
# scan6 -i eth0 -L -e -v
Perform host scanning on the local network ("-L" option) using inter-
face "eth0" ("-i" option). Use both ICMPv6 echo requests and unrecog-
nized IPv6 options of type 10xxxxxx (default). Print link-link layer
addresses along with IPv6 addresses ("-e" option). Be verbose ("-v" op-
tion).
Example #2
# scan6 -d 2001:db8::/64 --tgt-virtual-machines all --ipv4-host
10.10.10.0/24
Scan for virtual machines (both VirtualBox and vmware) in the prefix
2001:db8::/64. The additional information about the IPv4 prefix em-
ployed by the host system is leveraged to reduce the search space.
Example #3
# scan6 -d 2001:db8::/64 --tgt-ipv4-embedded ipv4-32 --ipv4-host
10.10.10.0/24
Scan for IPv6 addresses of the network 2001:db8::/64 that embed the
IPv4 prefix 10.10.10.0/24 (with the 32-bit encoding).
Example #4
# scan6 -d 2001:db8:0-500:0-1000
Scan for IPv6 addresses of the network 2001:db8::/64, varying the two
lowest order 16-bit words of the addresses in the range 0-500 and
0-1000, respectively.
Example #5
# scan6 -d fc00::/64 --tgt-vendor 'Dell Inc' -p tcp
Scan for network devices manufactured by 'Dell Inc' in the target pre-
fix fc00::/64. The tool will employ TCP segments as the probe packets
(rather than the default ICMPv6 echo requests).
Example #6
# scan6 -i eth0 -L -S 66:55:44:33:22:11 -p unrec -P global -v
Use the "eth0" interface ("-i" option) to perform host-scanning on the
local network ("-L" option). The Ethernet Source Address is set to
"66:55:44:33:22:11" ("-S" option). The probe packets will be IPv6 pack-
ets with unrecognized options of type 10xxxxxx ("-p" option). The tool
will only print IPv6 global addresses ("-P" option). The tool will be
verbose.
Example #7
# scan6 -d 2001:db8::/64 -w KNOWN_IIDS
Perform an address scan of a set of known hosts listed in the file
KNOWN_IIDS, at remote network 2001:db8::/64. The target addresses are
obtaining by concatenating the network prefix 2001:db8::/64 with the
interface IDs of each of the addresses fund in the file KNOWN_IIDS.
Example #8
# scan6 -i eth0 -L -P global --print-unique -e
Use the "eth0" interface ("-i" option) to perform host-scanning on the
local network ("-L" option). Print only global unicast addresses ("-P"
option), and at most one IPv6 address per Ethernet address
("--print-unique" option). Ethernet addresses will be printed along
with the corresponiding IPv6 address ("-e" option).
Example #9
# scan6 -m knownprefixes.txt -w knowniids.txt -l -z 60 -t -v
Build the list of targets from the IPv6 prefixes contained in the file
'knownprefixes.txt' and the Interface IDs (IIDs) contained in the file
'knowniids.txt'. Poll the targets periodically ("-l" option), and sleep
60 seconds after each iteration ("-z" option). Print a timestamp along
the IPv6 address of each alive node ("-t" option). Be verbose ("-v" op-
tion).
AUTHOR
The script6 tool and the corresponding manual pages were produced by
Fernando Gont <[email protected]> for SI6 Networks
<http://www.si6networks.com>.
COPYRIGHT
Copyright (c) 2014-2015 Fernando Gont.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A
copy of the license is available at <http://www.gnu.org/li-
censes/fdl.html>.
BLACKHOLE6(1)
flow6
A security assessment tool for the IPv6 Flow Label field
root@kali:~# flow6 -h
SI6 Networks' IPv6 Toolkit (current)
flow6: Security assessment tool for the IPv6 Flow Label field
usage: flow6 -d DST_ADDR [-i INTERFACE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR]
[-s SRC_ADDR[/LEN]] [-A HOP_LIMIT] [-P PROTOCOL] [-p PORT]
[-W] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--protocol, -P IPv6 Payload protocol (valid: TCP, UDP)
--dst-port, -p Transport Protocol Destination Port
--flow-label-policy, -W Assess the Flow Label generation policy
--help, -h Print help for the flow6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont on behalf of SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
frag6
A security assessment tool for IPv6 fragmentation
root@kali:~# frag6 -h
SI6 Networks' IPv6 Toolkit (current)
frag6: A security assessment tool for attack vectors based on IPv6 fragments
usage: frag6 -d DST_ADDR [-i INTERFACE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR]
[-s SRC_ADDR[/LEN]] [-A HOP_LIMIT] [-u DST_OPT_HDR_SIZE]
[-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-P FRAG_SIZE]
[-O FRAG_TYPE] [-o FRAG_OFFSET] [-I FRAG_ID] [-T] [-n]
[-p | -W | -X | -F N_FRAGS] [-l] [-z SECONDS] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--frag-size, -P IPv6 fragment payload size
--frag-type, -O IPv6 Fragment Type {first, last, middle, atomic}
--frag-offset, -o IPv6 Fragment Offset
--frag-id, -I IPv6 Fragment Identification
--no-timestamp, -T Do not include a timestamp in the payload
--no-responses, -n Do not print responses to transmitted packets
--frag-reass-policy, -p Assess fragment reassembly policy
--frag-id-policy, -W Assess the Fragment ID generation policy
--pod-attack, -X Perform a 'Ping of Death' attack
--flood-frags, -F Flood target with IPv6 fragments
--loop, -l Send IPv6 fragments periodically
--sleep, -z Pause between sending IPv6 fragments
--verbose, -v Be verbose
--help, -h Print help for the frag6 tool
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
icmp6
A security assessment tool for attack vectors based on ICMPv6 packets
root@kali:~# icmp6 -h
SI6 Networks' IPv6 Toolkit (current)
icmp6: Security assessment tool for attack vectors based on ICMPv6 error messages
usage: icmp6 [-i INTERFACE] [-s SRC_ADDR[/LEN]] [-d DST_ADDR]
[-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-c HOP_LIMIT] [-y FRAG_SIZE]
[-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE]
[-t TYPE[:CODE] | -e CODE | -A CODE -V CODE -R CODE] [-r TARGET_ADDR]
[-x PEER_ADDR] [-c HOP_LIMIT] [-m MTU] [-O POINTER] [-p PAYLOAD_TYPE]
[-P PAYLOAD_SIZE] [-n] [-a SRC_PORTL[:SRC_PORTH]]
[-o DST_PORTL[:DST_PORTH]] [-X TCP_FLAGS] [-q TCP_SEQ] [-Q TCP_ACK]
[-V TCP_URP] [-w TCP_WIN] [-M] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]]
[-J LINK_ADDR] [-K LINK_ADDR] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]]
[-B LINK_ADDR] [-G LINK_ADDR] [-f] [-L | -l] [-z] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -c IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--icmp6, -t ICMPv6 Type:Code
--icmp6-dest-unreach, -e ICMPv6 Destination Unreachable
--icmp6-packet-too-big, -E ICMPv6 Packet Too Big
--icmp6-time-exceeded, -A ICMPv6 Time Exceeeded
--icmp6-param-problem, -R ICMPv6 Parameter Problem
--mtu, -m Next-Hop MTU (ICMPv6 Packet Too Big)
--pointer, -O Pointer (ICMPv6 Parameter Problem
--payload-type, -p Redirected Header Payload Type
--payload-size, -P Redirected Header Payload Size
--no-payload, -n Do not include a Redirected Header Option
--ipv6-hlim, -C ICMPv6 Payload's Hop Limit
--target-addr, -r ICMPv6 Payload's IPv6 Source Address
--peer-addr, -x ICMPv6 Payload's IPv6 Destination Address
--target-port, -o ICMPv6 Payload's Source Port
--peer-port, -a ICMPv6 Payload's Destination Port
--tcp-flags, -X ICMPv6 Payload's TCP Flags
--tcp-seq, -q ICMPv6 Payload's TCP SEQ Number
--tcp-ack, -Q ICMPv6 Payload's TCP ACK Number
--tcp-urg, -V ICMPv6 Payload's TCP URG Pointer
--tcp-win, -w ICMPv6 Payload's TCP Window
--resp-mcast, -M Respond to Multicast Packets
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--sanity-filters, -f Add sanity filters
--listen, -L Listen to incoming traffic
--loop, -l Send periodic ICMPv6 error messages
--sleep, -z Pause between sending ICMPv6 error messages
--help, -h Print help for the icmp6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
jumbo6
A security assessment tool for attack vectors based on IPv6 jumbograms
root@kali:~# jumbo6 -h
SI6 Networks' IPv6 Toolkit (current)
jumbo6: Security assessment tool for attack vectors based on IPv6 jumbo packets
usage: jumbo6 -d DST_ADDR [-i INTERFACE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR]
[-s SRC_ADDR[/LEN]] [-A HOP_LIMIT] [-H HBH_OPT_HDR_SIZE]
[-U DST_OPT_U_HDR_SIZE] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE]
[-q IPV6_LENGTH] [-Q JUMBO_LENGTH] [-P PAYLOAD_SIZE] [-j PREFIX[/LEN]]
[-k PREFIX[/LEN]] [-J LINK_ADDR] [-K LINK_ADDR] [-b PREFIX[/LEN]]
[-g PREFIX[/LEN]] [-B LINK_ADDR] [-G LINK_ADDR] [-L | -l] [-z SECONDS]
[-v] [-h]
OPTIONS:
--interface, -i Network interface
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--ipv6-length, -q IPv6 Payload Length
--jumbo-length, -Q Jumbo Payload Length
--payload-size, -P ICMPv6 payload size
--loop, -l Send periodic Jumbo messages
--sleep, -z Pause between sending Redirect messages
--listen, -L Listen to incoming packets
--verbose, -v Be verbose
--help, -h Print help for the jumbo6 tool
Programmed by Fernando Gont on behalf of SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
messi
mldq6
A security assessment tool for attack vectors based on ICMPv6 MLD Query messages
root@kali:~# mldq6 -h
SI6 Networks' IPv6 Toolkit (current)
mldq6: Security assessment tool for attack vectors based on MLD Query messages
usage: mldq6 -i INTERFACE [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-A HOP_LIMIT] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-E LINK_ADDR] [-e] [-m MLD_ADDR] [-r MLD_RESP_DELAY ] [-F N_SOURCES] [-z SECONDS] [-l] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-link-opt, -E Source link-layer address option
--add-slla-opt, -e Add Source link-layer address option
--mld-addr, -m MLD Query Multicast Address
--mld-resp-delay, -r MLD Query Maximum Response Delay [ms]
--flood-sources, -F Number of Source Addresses to forge randomly
--loop, -l Send MLD Query periodically
--sleep, -z Pause between peiodic MLD Queries [sec]
--help, -h Print help for the mldq6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
na6
A security assessment tool for attack vectors based on ICMPv6 Neighbor Advertisement messages
root@kali:~# na6 -h
SI6 Networks' IPv6 Toolkit (current)
na6: Security Assessment tool for attack vectors based on NA messages
usage: na6 -i INTERFACE [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-S LINK_SRC_ADDR] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-D LINK-DST-ADDR] [-t TARGET_ADDR[/LEN]] [-r] [-c] [-o] [-E LINK_ADDR] [-e] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]] [-J LINK_ADDR] [-K LINK_ADDR] [-w PREFIX[/LEN]] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]] [-B LINK_ADDR] [-G LINK_ADDR] [-W PREFIX[/LEN]] [-F N_SOURCES] [-T N_TARGETS] [-L | -l] [-z] [-v] [-V] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--target, -t ND IPv6 Target Address
--target-lla-opt, -E Source link-layer address option
--add-tlla-opt, -e Add Source link-layer address option
--router, -r Set the 'Router Flag'
--solicited, -c Set the 'Solicited' flag
--override, -o Set the 'Override' flag
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--block-target, -w Block ND Target IPv6 prefix
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--accept-target, -W Accept ND Target IPv6 prefix
--flood-targets, -T Flood with NA's for multiple Target Addresses
--flood-sources, -F Number of Source Addresses to forge randomly
--listen, -L Listen to Neighbor Solicitation messages
--loop, -l Send periodic Neighbor Advertisements
--sleep, -z Pause between sending NA messages
--help, -h Print help for the na6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
ni6
A security assessment tool for attack vectors based on ICMPv6 Node Information messages
root@kali:~# ni6 -h
SI6 Networks' IPv6 Toolkit (current)
ni6: Security assessment tool for attack vectors based on ICMPv6 NI messages
usage:
ni6 [-i INTERFACE] [-S LINK_SRC_ADDR | -R] [-D LINK-DST-ADDR]
[-s SRC_ADDR[/LEN] | -r] [-d DST_ADDR] [-c HOP_LIMIT] [-y FRAG_SIZE]
[-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE]
[-P SIZE | -6 IPV6_ADDR | -4 IPV4_ADDR | -n NAME | -N LEN | -x LEN -o TYPE]
[-Z SIZE] [-e] [-C ICMP6_CODE] [-q NI_QTYPE] [-X NI_FLAGS]
[-P SIZE | -w IPV6_ADDR | -W IPV4_ADDR | -a NAME | -A LEN | -Q LEN -O TYPE]
[-E] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]] [-J LINK_ADDR]
[-K LINK_ADDR] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]] [-B LINK_ADDR]
[-G LINK_ADDR] [-L | -l] [-z] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -c IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--payload-size, -P ICMPv6 NI payload size
--subject-ipv6. -6 Subject IPv6 Address
--subject-ipv4, -4 Subject IPv4 address
--subject-name, -n Subject Name
--subject-fname, -N Forge Subject Name of specific length
--subject-ename, -x For (malformed) Subject name of specified length
--subject-nloop, -o Subject is a Name with a DNS compression loop
--max-label-size, -Z Maximum DNS label size (defaults to 63)
--sname-slabel, -e Subject Name is a single-label name
--code, -C ICMPv6 code
--qtype, -q ICMPv6 NI Qtype
--flags, -X ICMPv6 NI flags
--data-ipv6, -w Data IPv6 Address
--data-ipv4, W Data IPv4 Address
--data-name, -a Data Name
--data-fname, -A Forge Data Name of specific length
--data-ename, -Q For (malformed) Data Name of specified length
--data-nloop, -O Data is a Name with a DNS compression loop
--dname-slabel, -E Subject Name is a single-label name
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--forge-src-addr, -r Forge IPv6 Source Address
--forge-link-src-addr, -R Forge link-layer Source Address
--loop, -l Send periodic ICMPv6 error messages
--sleep, -z Pause between sending ICMPv6 messages
--listen, -L Listen to incoming traffic
--help, -h Print help for the ni6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
ns6
A security assessment tool for attack vectors based on ICMPv6 Neighbor Solicitation messages
root@kali:~# ns6 -h
SI6 Networks' IPv6 Toolkit (current)
ns6: Security assessment tool for attack vectors based on NS messages
usage: ns6 -i INTERFACE [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-E LINK_ADDR] [-e] [-t TARGET_ADDR[/LEN]] [-F N_SOURCES] [-T N_TARGETS] [-z SECONDS] [-l] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--target-address, -t ND Target Address
--source-lla-opt, -E Source link-layer address option
--add-slla-opt, -e Add Source link-layer address option
--flood-sources, -F Number of Source Addresses to forge randomly
--flood-targets, -T Flood with NA's for multiple Target Addresses
--loop, -l Send Neighbor Solicitations periodically
--sleep, -z Pause between peiodic Neighbor Solicitations
--help, -h Print help for the ns6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
path6
A versatile IPv6-based traceroute tool
root@kali:~# path6 -h
SI6 Networks' IPv6 Toolkit (current)
path6: A versatile IPv6 traceroute
usage: path6 -d DST_ADDR [-i INTERFACE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR]
[-s SRC_ADDR[/LEN]] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE]
[-H HBH_OPT_HDR_SIZE] [-y FRAG:SIZE] [-f FLOW_LABEL]
[-m MODE] [-p PROBE_TYPE] [-P PAYLOAD_SIZE] [-a DST_PORT]
[-X TCP_FLAGS] [-r RATE_LIMIT] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--flow-label, -f Specifies the Flow Label Value (or 'random')
--output-mode, -m Specifies output mode (e.g. 'script')
--probe-type, -p Probe type {icmp, tcp, udp, ah, esp}
--payload-size, -P Payload Size
--dst-port, -a Transport-layer Destination Port
--tcp-flags, -X TCP Flags
--rate-limit, -r Rate limit the probe packets
--verbose, -v Be verbose
--help, -h Print help for the path6 tool
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
ra6
A security assessment tool for attack vectors based on ICMPv6 Router Advertisement messages
root@kali:~# ra6 -h
SI6 Networks' IPv6 Toolkit (current)
ra6: Security assessment tool for attack vectors based on RA messages
usage: ra6 -i INTERFACE [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-S LINK_SRC_ADDR] [-D LINK_DST_ADDR] [-c CUR_HOP] [-t ROUTER_LIFETIME] [-r REACHABLE_TIME] [-x RETRANS_TIMER] [-m] [-o] [-a] [-q] [-p PREFERENCE] [-E LINK_ADDR] [-e] [-P PREFIX/LEN[#FLAGS[#VALID[#PREFERRED]]]] [-M MTU] [-N [LIFETIME[#DNS_ADDR]]] [-R PREFIX/LEN[#PREF[#LIFETIME]]] [-f N_PREFIXES] [-F N_SOURCES] [-w N_ROUTES] [-W N_ADDRS[#ADDRSPEROPT]] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]] [-J LINK_ADDR] [-K LINK_ADDR] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]] [-B LINK_ADDR] [-G LINK_ADDR] [-L] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address (or IPv6 prefix when flooding)
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--managed, -m Set de Managed bit
--other, -o Set the Other bit
--home-agent, -a Set the Home Agent bit
--nd-proxy, -q Set the ND Proxy bit
--lifetime, -t Router Lifetime
--reachable, -r Reachable time
--preference, -p Preference
--retrans, -x Retrans Timer
--curhop, -c CurHop (advised Hop Limit)
--prefix-opt, -P Prefix option (Prefix/Len#flags#valid#preferred)
--mtu-opt, -M MTU option
--src-link-opt, -E Source link-layer address option
--add-slla-opt, -e Add Source link-layer address option
--link-src-addr, -S Link-layer Source Address
--link-dst-addr, -D Link-layer Destination Address
--route-opt, -R Route Information option (Prefix/Len#pref#lifetime)
--rdnss-opt, -N Recursive DNS Server option (lifetime#IPv6addr)
--flood-sources, -F Number of Source Addresses to forge randomly
--flood-prefixes, -f Number of Prefix options to forge randomly
--flood-routes, -w Number of Route Info options to forge randomly
--flood-dns, -W Number of RDNSS options to forge randomly
--loop, -l Send periodic Router Advertisements
--sleep, -z Pause between sending RA messages
--listen, -L Listen to Router Solicitation messagres
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--verbose, -v Be verbose
--help, -h Print help for the ra6 tool
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
rd6
A security assessment tool for attack vectors based on ICMPv6 Redirect messages
root@kali:~# rd6 -h
SI6 Networks' IPv6 Toolkit (current)
rd6: Security assessment tool for attack vectors based on Redirect messages
usage: rd6 [-i INTERFACE] [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-A HOP_LIMIT] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-r RD_DESTADDR/LEN] [-t RD_TARGETADDR/LEN] [-p PAYLOAD_TYPE] [-P PAYLOAD_SIZE] [-n] [-c HOP_LIMIT] [-x SRC_ADDR] [-a SRC_PORT] [-o DST_PORT] [-X TCP_FLAGS] [-q TCP_SEQ] [-Q TCP_ACK] [-V TCP_URP] [-w TCP_WIN] [-M] [-O] [-N] [-E LINK_ADDR] [-e] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]] [-J LINK_ADDR] [-K LINK_ADDR] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]] [-B LINK_ADDR] [-G LINK_ADDR] [-f] [-R N_DESTS] [-T N_TARGETS] [-F N_SOURCES] [-L | -l] [-z] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--redir-dest, -r Redirect Destination Address
--redir-target, -t Redirect Target Address
--payload-type, -p Redirected Header Payload Type
--payload-size, -P Redirected Header Payload Size
--no-payload, -n Do not include a Redirected Header Option
--ipv6-hlim, -c Redirected Header Payload's Hop Limit
--peer-addr, -x Redirected Header Payload's IPv6 Source Address
--peer-port, -a Redirected Header Payload's Source Port
--redir-port, -o Redirected Header Payload's Destination Port
--tcp-flags, -X Redirected Header Payload's TCP Flags
--tcp-seq, -q Redirected Header Payload's TCP SEQ Number
--tcp-ack, -Q Redirected Header Payload's TCP ACK Number
--tcp-urg, -V Redirected Header Payload's TCP URG Pointer
--tcp-win, -w Redirected Header Payload's TCP Window
--resp-mcast, -M Respond to Multicast Packets
--make-onlink, -O Make victim on-link
--learn-router, -N Dynamically learn local router addresses
--target-lla-opt, -E Target link-layer address option
--add-tlla-opt, -e Add Target link-layer address option
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--sanity-filters, -f Add sanity filters
--flood-dests, -R Flood with multiple Redirect Destination Addresses
--flood-targets, -T Flood with multiple Redirect Target Addresses
--flood-sources, -F Flood with multiple IPv6 Source Addresses
--listen, -L Listen to incoming packets
--loop, -l Send periodic Redirect messages
--sleep, -z Pause between sending Redirect messages
--help, -h Print help for the rd6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
rs6
A security assessment tool for attack vectors based on ICMPv6 Router Solicitation messages
root@kali:~# rs6 -h
SI6 Networks' IPv6 Toolkit (current)
rs6: Security assessment tool for attack vectors based on RS messages
usage: rs6 -i INTERFACE [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-E LINK_ADDR] [-e] [-F N_SOURCES] [-z SECONDS] [-l] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--src-link-opt, -E Source link-layer address option
--add-slla-opt, -e Add Source link-layer address option
--flood-sources, -F Number of Source Addresses to forge randomly
--loop, -l Send Router Solicitations periodically
--sleep, -z Pause between peiodic Router Solicitations
--help, -h Print help for the rs6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
scan6
An IPv6 host scanner
root@kali:~# scan6 -h
SI6 Networks' IPv6 Toolkit (current)
scan6: An advanced IPv6 scanning tool
usage: scan6 (-L | -d) [-i INTERFACE] [-s SRC_ADDR[/LEN] | -f]
[-S LINK_SRC_ADDR | -F] [-p PROBE_TYPE] [-Z PAYLOAD_SIZE] [-o SRC_PORT]
[-a DST_PORT] [-X TCP_FLAGS] [-P ADDRESS_TYPE] [-q] [-e] [-t]
[-x RETRANS] [-o TIMEOUT] [-V VM_TYPE] [-b] [-B ENCODING] [-g]
[-k IEEE_OUI] [-K VENDOR] [-m PREFIXES_FILE] [-w IIDS_FILE] [-W IID]
[-Q IPV4_PREFIX[/LEN]] [-T] [-I INC_SIZE] [-r RATE(bps|pps)] [-l]
[-z SECONDS] [-c CONFIG_FILE] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Range or Prefix
--prefixes-file, -m Prefixes file
--link-src-addr, -S Link-layer Destination Address
--probe-type, -p Probe type for host scanning {echo, unrec, all}
--port-scan, -j Port scan type and range {tcp,udp}:port_low[-port_hi]
--tcp-scan-type, -G TCP port-scanning type {syn,fin,null,xmas,ack}
--payload-size, -Z TCP/UDP Payload Size
--src-port, -o TCP/UDP Source Port
--dst-port, -a TCP/UDP Destination Port
--tcp-flags, -X TCP Flags
--print-type, -P Print address type {local, global, all}
--print-unique, -q Print only one IPv6 addresses per Ethernet address
--print-link-addr, -e Print link-layer addresses
--print-timestamp, -t Print timestamp for each alive node
--retrans, -x Number of retransmissions of each probe
--timeout, -O Timeout in seconds (default: 1 second)
--local-scan, -L Scan the local subnet
--rand-src-addr, -f Randomize the IPv6 Source Address
--rand-link-src-addr, -F Randomize the Ethernet Source Address
--tgt-virtual-machines, -V Target virtual machines
--tgt-low-byte, -b Target low-byte addresses
--tgt-ipv4, -B Target embedded-IPv4 addresses
--tgt-port, -g Target embedded-port addresses
--tgt-ieee-oui, -k Target IPv6 addresses embedding IEEE OUI
--tgt-vendor, -K Target IPv6 addresses for vendor's IEEE OUIs
--tgt-iids-file, -w Target Interface IDs (IIDs) in specified file
--tgt-iid, -W Target Interface IDs (IIDs)
--ipv4-host, -Q Host IPv4 Address/Prefix
--sort-ouis, -T Sort IEEE OUIs
--inc-size, -I Increments size
--rate-limit, -r Rate limit the address scan to specified rate
--loop, -l Send periodic probes to the specified targets
--sleep, -z Pause between periodic probes
--config-file, -c Use alternate configuration file
--help, -h Print help for the scan6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
script6
A tool to make complex IPv6 tasks easy script6 SCRIPT [PARAMETERS ]
root@kali:~# man script6
SCRIPT6(1) General Commands Manual SCRIPT6(1)
NAME
script6 - A tool to make complex IPv6 tasks easy script6 SCRIPT [PARA-
METERS]
DESCRIPTION
script6 is a set up scripts that make frequent and/or rather complex
IPv6-related tasks easy.
SCRIPTS
get-aaaa
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (one per line),
and obtains the AAAA records for the corresponding domain. If the
domain name does not contain AAAA records, the tool will add
the suffix "www.", in the hopes that the resulting domain name
might contain some.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
IPV6_ADDRESS_1
IPV6_ADDRESS_2
get-mx
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the MX for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
MX_RECORD_1
MX_RECORD_2
get-ns
This script takes no further arguments, and operates as follows:
+ The tool reads domain names from standard-input (oner per line),
and obtains the NS records for the corresponding domain.
+ Lines where the first non-blank character is the numeral sign (#)
are consdered to contain comments, and hence are ignored.
+ The format of the resulting output is:
# DOMAIN_NAME (CANONIC_NAME)
NS_RECORD_1
NS_RECORD_2
get-asn6
Obtain the Origin Autonomous System (AS) number corresponding to the
specified address.
get-as6
Obtain information about the Origin Autonomous System (AS) correspond-
ing to the specified address.
get-alexa-domains
This script takes no further arguments, and operates as follows:
+ It reads from standard input lines with the same format as those
of Alexa's Top 1M web sites. That is, lines with the following syntax:
RANKING,DOMAIN_NAME
+ It extracts the domain name from each line, and prints the
corresponding domain name to standard output.
This script is typically useful for extracting domain names from
Alexa's Top 1M web sites file, such that they can be processed by other
tools (e.g. the get-aaaa command of script6).
get-trace-stats
This command causes the script6 tool to read from standard input the
results of a "script6 trace" command (typically piped from a file), and
produce statistics based on such results.
Among the statistics produced by this command are:
* Packet drop rate: That is, the percentage of destination IPv6
addresses that result unreachable if IPv6 extension headers are
employed.
* Packet drop rate by different AS: That is, the percentage of
packet
drops that occur at an Autonomous System (AS) other than the AS
corresponding to the destination IPv6 address.
* Packet drop rate by same AS: That is, the percentage of packet
drops that occur at the same Autonomous System (AS) as that
corresponding to the destination IPv6 address.
* Delta-Hops statistics: Statistics regarding the Delta-Hops at
which
the packet drops occur, with "delta-hops" defined as "the number
of
hops from the intended destination".
The get-trace-stats performs a number of sanity checks on the input
data (i.e., the output from "script6 trace"). For example, if a line of
input indicates that the last responding node for the non-EH-enabled
path6 command is not the intended destination, this means that the des-
tination is unreachable even when no IPv6 extension headers are em-
ployed, and hence the corresponding line will be discarded.
trace DESTINATION [EHTYPE[EHSIZE]] [PROTOCOL [DESTPORT]]]
The trace command causes the script6 to read IPv6 addresses from stan-
dard input (typically piped from a file). For each IPv6 address, the
script6 will try to isolate IPv6 blackholes resulting from employing
IPv6 extension headers. By default, the probe packets (containing IPv6
Extension Headers) are IPv6 packets with a Destination Options Header
of 8 bytes, encapsulating an ICMPv6 Echo Request message. However, this
can be overridden by specifying the EHTYPE {DO,HBH,FH}, EHSIZE (an in-
teger), PROTOCOL {tcp,udp,icmpv6}, and DESTPORT (a short integer) para-
meters.
The "trace" command of the script6 tool internally employs the path6
tool of the toolkit as follows. Let us assume that we want to isolate
an IPv6 blackhole on the path towards the destination system
2001:db8:d::1. Firstly, script6 will obtain the output of path6 towards
such destination:
1. 2001:db8:1:1000::1
2. 2001:db8:2:2000::4
3. 2001:db8:2:4000::1
4. 2001:db8:3:4000::1
5. 2001:db8:3:1000::1
6. 2001:db8:4:4000::1
7. 2001:db8:4:1000::1
8. 2001:db8:5:5000::1
9. 2001:db8:5:6000::1
10. 2001:db8:d::1
Subsequently, script6 will obtain the output of EH-enabled path6 to the
same destination:
1. 2001:db8:1:1000::1
2. 2001:db8:2:2000::4
3. 2001:db8:2:4000::1
4. 2001:db8:3:4000::1
5. 2001:db8:3:1000::1
6. 2001:db8:4:4000::1
For the sake of brevity, let us refer to the last-responding node in
the EH-enabled path6 ("2001:db8:4:4000::1" in this case) as "M". Assum-
ing both packets in both path6 commands employ the same path, we will
refer to "the node following the last responding node in the EH-enabled
path6" ("2001:db8:4:1000::1" in our case), as "M+1", etc.
Based on traceroute information above, which node is the one actually
dropping the EH-enabled packets will depend on whether the dropping
node filters packets on ingress or the egress. If the former, the drop-
ping node will be M+1. If the latter, the dropping node will be "M".
path6 assumes that nodes perform ingress-filtering. Thus, in our exam-
ple above the last responding node to the EH-enabled traceroute ("M")
is "2001:db8:4:4000::1", and therefore we assume the "node" dropping
node to be "2001:db8:4:1000::1" ("M+1").
The resulting output will have the following syntax:
DEST#LAST_NOEH#HOPS_NOEH#LAST_EH$HOPS_EH#DROPN#DROPN2
where:
* DEST: Destination IPv6 address (as read from standard input).
In our example above, this would be 2001:db8:d::1.
* LAST_NOEH: Last responding IPv6 address for the path6 command
with no IPv6 extension headers (this will be the same as DEST
if there is a working path to the destination). In our example
above, this would be 2001:db8:d::1.
* HOPS_NOEH: Number of hops to LAST_NOEH. In our example above,
this would be "10".
* LAST_EH: Last responding IPv6 address in the EH-enabled path6
command. In our example above, this would be 2001:db8:4:4000::1.
* HOPS_EH: Number of hops to LAST_EH. In our example above, this
would be "6".
* DROPN: Dropping node (M+1 in our explanation above). In our
example above, this would be 2001:db8:4:1000::1.
* DROPN: Node after the dropping node (M+2). In our example,
this would be 2001:db8:5:5000::1.
The output of the "trace" command is meant to be processed by the get-
trace-stats command of the script6 tool. Please check the blackhole6(1)
tool for a more human-friendly tool for isolating IPv6 blackholes.
EXAMPLES
The following sections illustrate typical use cases of the script6
tool.
Example #1
$ script6 get-asn 2001:db8::1
Obtain the Origin Autonomous System (AS) number corresponding to the
IPv6 address 2001:db8::1.
Example #2
$ script6 get-as 2001:db8::1
Obtain information about the Origin Autonomous System (AS) correspond-
ing to the IPv6 address 2001:db8::1.
Example #3
$ cat domains.txt | script6 get-aaaa > domains-aaaa.txt
Map the domain names contained in the file "domains.txt" into AAAA
records, and save the results in the file "domains-aaaa.txt".
Example #4
# cat domains-aaaa.txt | script6 trace do8 tcp port 25 > trace-re-
sults.txt
Find IPv6 blackholes in the path to each of the IPv6 addresses con-
tained in the file "domains-aaaa.txt" (one per line), and save the re-
sults to the file "trace-results.txt". The probe packets to be employed
are IPv6 packets with a Destination Options header of 8 bytes, encapsu-
lating a TCP segment with the Destinatio Port set to 25.
Example #5
$ cat trace-results.txt | script6 get-trace-stats
Produce statistics based on the trace results from the file "trace-re-
sults.txt" (produced with "script6 trace").
SEE ALSO
blackhole6(1) path6(1)
IETF RFC7872 (available at: <http://tools.ietf.org/html/rfc7872>) for a
discussion of support of IPv6 Extension Headers in the public Internet.
AUTHOR
The script6 tool and the corresponding manual pages were produced by
Fernando Gont <[email protected]> for SI6 Networks
<http://www.si6networks.com>.
COPYRIGHT
Copyright (c) 2014-2015 Fernando Gont.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A
copy of the license is available at <http://www.gnu.org/li-
censes/fdl.html>.
SCRIPT6(1)
tcp6
A security assessment tool for TCP/IPv6 implementations
root@kali:~# tcp6 -h
SI6 Networks' IPv6 Toolkit (current)
tcp6: Security assessment tool for attack vectors based on TCP/IPv6 packets
usage: tcp6 [-i INTERFACE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-A HOP_LIMIT] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-P PAYLOAD_SIZE] [-o SRC_PORT[/LEN]] [-a DST_PORT[/LEN]] [-X TCP_FLAGS] [-q TCP_SEQ] [-Q TCP_ACK] [-V TCP_URP] [-w TCP_WIN] [-c OPEN_MODE] [-C CLOSE_MODE] [-Z DATA] [-P PAYLOAD_SIZE] [-W WIN_MODE][-M WIN_MOD_MODE] [-r RATE] [-p PROBE_MODE] [-x RETRANS] [-N] [-n] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]] [-J LINK_ADDR] [-K LINK_ADDR] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]] [-B LINK_ADDR] [-G LINK_ADDR] [-F N_SOURCES] [-T N_PORTS] [-L | -l] [-z SECONDS] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--payload-size, -P TCP Payload Size
--src-port, -o TCP Source Port (PORT[/LEN])
--dst-port, -a TCP Destination Port (PORT[/LEN])
--tcp-flags, -X TCP Flags
--tcp-seq, -q TCP Sequence Number
--tcp-ack, -Q TCP Acknowledgment Number
--not-ack-data, -N Do not acknowledge the TCP payload
--not-ack-flags, -n Do not acknowledge the TCP flags
--tcp-urg, -V TCP Urgent Pointer
--tcp-win, -w TCP Window
--window-mode, -W TCP Window mode {close,modulate}
--win-modulation, -M TCP Window modulation (WIN1:TIME1:WIN2:TIME2)
--open-mode, -c Open mode {simultaneous,passive,abort,active}
--close-mode, -C Close mode {simultaneous,passive,abort
active,FIN-WAIT-1,FIN-WAIT-2,LAST-ACK}
--data, -Z TCP payload data
--rate-limit, -r Rate limit the address scan to specified rate
--probe-mode, -p TCP probe mode {dump,script}
--retrans, -x Set number of TCP retransmissions
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--flood-sources, -F Flood from multiple IPv6 Source Addresses
--flood-ports, -T Flood from multiple TCP Source Ports
--listen, -L Listen to incoming packets
--loop, -l Send periodic TCP segments
--sleep, -z Pause between sending TCP segments
--help, -h Print help for the tcp6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
udp6
A security assessment tool for UDP/IPv6 implementations
root@kali:~# udp6 -h
SI6 Networks' IPv6 Toolkit (current)
udp6: Security assessment tool for attack vectors based on UDP/IPv6 packets
usage: udp6 [-i INTERFACE] [-S LINK_SRC_ADDR] [-D LINK-DST-ADDR] [-s SRC_ADDR[/LEN]] [-d DST_ADDR] [-A HOP_LIMIT] [-y FRAG_SIZE] [-u DST_OPT_HDR_SIZE] [-U DST_OPT_U_HDR_SIZE] [-H HBH_OPT_HDR_SIZE] [-P PAYLOAD_SIZE] [-o SRC_PORT[/LEN]] [-a DST_PORT[/LEN]] [-N] [-f] [-j PREFIX[/LEN]] [-k PREFIX[/LEN]] [-J LINK_ADDR] [-K LINK_ADDR] [-b PREFIX[/LEN]] [-g PREFIX[/LEN]] [-B LINK_ADDR] [-G LINK_ADDR] [-F N_SOURCES] [-T N_PORTS] [-L | -l] [-z SECONDS] [-v] [-h]
OPTIONS:
--interface, -i Network interface
--src-addr, -s IPv6 Source Address (ADDRESSS[/LEN])
--dst-addr, -d IPv6 Destination Address
--hop-limit, -A IPv6 Hop Limit
--frag-hdr. -y Fragment Header
--dst-opt-hdr, -u Destination Options Header (Fragmentable Part)
--dst-opt-u-hdr, -U Destination Options Header (Unfragmentable Part)
--hbh-opt-hdr, -H Hop by Hop Options Header
--link-src-addr, -S Link-layer Destination Address
--link-dst-addr, -D Link-layer Source Address
--payload-size, -P UDP Payload Size
--src-port, -o UDP Source Port (PORT[/LEN])
--dst-port, -a UDP Destination Port (PORT[/LEN])
--data, -Z UDP payload data
--rate-limit, -r Rate limit the address scan to specified rate
--probe-mode, -p UDP probe mode {dump,script}
--block-src, -j Block IPv6 Source Address prefix
--block-dst, -k Block IPv6 Destination Address prefix
--block-link-src, -J Block Ethernet Source Address
--block-link-dst, -K Block Ethernet Destination Address
--accept-src, -b Accept IPv6 Source Address prefix
--accept-dst, -g Accept IPv6 Destination Address prefix
--accept-link-src, -B Accept Ethernet Source Address
--accept-link-dst, -G Accept Ethernet Destination Address
--flood-sources, -F Flood from multiple IPv6 Source Addresses
--flood-ports, -T Flood from multiple UDP Source Ports
--listen, -L Listen to incoming packets
--loop, -l Send periodic UDP segments
--sleep, -z Pause between sending UDP segments
--help, -h Print help for the udp6 tool
--verbose, -v Be verbose
Programmed by Fernando Gont for SI6 Networks <https://www.si6networks.com>
Please send any bug reports to <[email protected]>
Updated on: 2023-Aug-10