Packages and Binaries:
expect
Expect is a tool for automating interactive applications according to a script. Following the script, Expect knows what can be expected from a program and what the correct response should be. Expect is also useful for testing these same applications. And by adding Tk, you can also wrap interactive applications in X11 GUIs. An interpreted language provides branching and high-level control structures to direct the dialogue. In addition, the user can take control and interact directly when desired, afterward returning control to the script.
This package contains the expect binary and several Expect based scripts.
Installed size: 317 KB
How to install: sudo apt install expect
Dependencies:
- libc6
- libtcl8.6
- tcl-expect
- tcl8.6
autoexpect
Generate an Expect script from watching a session
root@kali:~# man autoexpect
AUTOEXPECT(1) General Commands Manual AUTOEXPECT(1)
NAME
autoexpect - generate an Expect script from watching a session
SYNOPSIS
autoexpect [ args ] [ program args... ]
INTRODUCTION
autoexpect watches you interacting with another program and creates an
Expect script that reproduces your interactions. For straightline
scripts, autoexpect saves substantial time over writing scripts by
hand. Even if you are an Expect expert, you will find it convenient to
use autoexpect to automate the more mindless parts of interactions. It
is much easier to cut/paste hunks of autoexpect scripts together than
to write them from scratch. And if you are a beginner, you may be able
to get away with learning nothing more about Expect than how to call
autoexpect.
The simplest way to use autoexpect is to call it from the command line
with no arguments. For example:
% autoexpect
By default, autoexpect spawns a shell for you. Given a program name
and arguments, autoexpect spawns that program. For example:
% autoexpect ftp ftp.cme.nist.gov
Once your spawned program is running, interact normally. When you have
exited the shell (or program that you specified), autoexpect will cre-
ate a new script for you. By default, autoexpect writes the new script
to "script.exp". You can override this with the -f flag followed by a
new script name.
The following example runs "ftp ftp.cme.nist.gov" and stores the re-
sulting Expect script in the file "nist".
% autoexpect -f nist ftp ftp.cme.nist.gov
It is important to understand that autoexpect does not guarantee a
working script because it necessarily has to guess about certain things
- and occasionally it guesses wrong. However, it is usually very easy
to identify and fix these problems. The typical problems are:
o Timing. A surprisingly large number of programs (rn, ksh,
zsh, telnet, etc.) and devices (e.g., modems) ignore key-
strokes that arrive "too quickly" after prompts. If you
find your new script hanging up at one spot, try adding a
short sleep just before the previous send.
You can force this behavior throughout by overriding the
variable "force_conservative" near the beginning of the gen-
erated script. This "conservative" mode makes autoexpect
automatically pause briefly (one tenth of a second) before
sending each character. This pacifies every program I know
of.
This conservative mode is useful if you just want to quickly
reassure yourself that the problem is a timing one (or if
you really don't care about how fast the script runs). This
same mode can be forced before script generation by using
the -c flag.
Fortunately, these timing spots are rare. For example, tel-
net ignores characters only after entering its escape se-
quence. Modems only ignore characters immediately after
connecting to them for the first time. A few programs ex-
hibit this behavior all the time but typically have a switch
to disable it. For example, rn's -T flag disables this be-
havior.
The following example starts autoexpect in conservative
mode.
autoexpect -c
The -C flag defines a key to toggle conservative mode. The
following example starts autoexpect (in non-conservative
mode) with ^L as the toggle. (Note that the ^L is entered
literally - i.e., enter a real control-L).
autoexpect -C ^L
The following example starts autoexpect in conservative mode
with ^L as the toggle.
autoexpect -c -C ^L
o Echoing. Many program echo characters. For example, if you
type "more" to a shell, what autoexpect actually sees is:
you typed 'm',
computer typed 'm',
you typed 'o',
computer typed 'o',
you typed 'r',
computer typed 'r',
...
Without specific knowledge of the program, it is impossible
to know if you are waiting to see each character echoed be-
fore typing the next. If autoexpect sees characters being
echoed, it assumes that it can send them all as a group
rather than interleaving them the way they originally ap-
peared. This makes the script more pleasant to read. How-
ever, it could conceivably be incorrect if you really had to
wait to see each character echoed.
o Change. Autoexpect records every character from the inter-
action in the script. This is desirable because it gives
you the ability to make judgements about what is important
and what can be replaced with a pattern match.
On the other hand, if you use commands whose output differs
from run to run, the generated scripts are not going to be
correct. For example, the "date" command always produces
different output. So using the date command while running
autoexpect is a sure way to produce a script that will re-
quire editing in order for it to work.
The -p flag puts autoexpect into "prompt mode". In this
mode, autoexpect will only look for the the last line of
program output - which is usually the prompt. This handles
the date problem (see above) and most others.
The following example starts autoexpect in prompt mode.
autoexpect -p
The -P flag defines a key to toggle prompt mode. The fol-
lowing example starts autoexpect (in non-prompt mode) with
^P as the toggle. Note that the ^P is entered literally -
i.e., enter a real control-P.
autoexpect -P ^P
The following example starts autoexpect in prompt mode with
^P as the toggle.
autoexpect -p -P ^P
OTHER FLAGS
The -quiet flag disables informational messages produced by autoexpect.
The -Q flag names a quote character which can be used to enter charac-
ters that autoexpect would otherwise consume because they are used as
toggles.
The following example shows a number of flags with quote used to pro-
vide a way of entering the toggles literally.
autoexpect -P ^P -C ^L -Q ^Q
STYLE
I don't know if there is a "style" for Expect programs but autoexpect
should definitely not be held up as any model of style. For example,
autoexpect uses features of Expect that are intended specifically for
computer-generated scripting. So don't try to faithfully write scripts
that appear as if they were generated by autoexpect. This is not use-
ful.
On the other hand, autoexpect scripts do show some worthwhile things.
For example, you can see how any string must be quoted in order to use
it in a Tcl script simply by running the strings through autoexpect.
SEE ALSO
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
AUTHOR
Don Libes, National Institute of Standards and Technology
expect and autoexpect are in the public domain. NIST and I would ap-
preciate credit if these programs or parts of them are used.
30 June 1995 AUTOEXPECT(1)
autopasswd
root@kali:~# autopasswd -h
spawn passwd -h
Usage: passwd [options] [LOGIN]
Options:
-a, --all report password status on all accounts
-d, --delete delete the password for the named account
-e, --expire force expire the password for the named account
-h, --help display this help message and exit
-k, --keep-tokens change password only if expired
-i, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-l, --lock lock the password of the named account
-n, --mindays MIN_DAYS set minimum number of days before password
change to MIN_DAYS
-q, --quiet quiet mode
-r, --repository REPOSITORY change password in REPOSITORY repository
-R, --root CHROOT_DIR directory to chroot into
-S, --status report password status on the named account
-u, --unlock unlock the password of the named account
-w, --warndays WARN_DAYS set expiration warning days to WARN_DAYS
-x, --maxdays MAX_DAYS set maximum number of days before password
change to MAX_DAYS
cryptdir
Encrypt/decrypt all files in a directory
root@kali:~# cryptdir -h
This example requires the mcrypt package.
decryptdir
Encrypt/decrypt all files in a directory
root@kali:~# decryptdir -h
This example requires the mcrypt package.
dislocate
Expect_disconnect and reconnect processes Disconnect and reconnect processes
root@kali:~# dislocate -h
bad flag "-h": must be -console, -ignore, -leaveopen, -noecho, -nottycopy, -nottyinit, -open, or -pty
while executing
"spawn -h"
("eval" body line 1)
invoked from within
"eval spawn $argv"
(procedure "child" line 11)
invoked from within
"child $datearg $argv"
invoked from within
"if {$argc} {
# initial creation occurs before fork because if we do it after
# then either the child or the parent may have to spin retrying
..."
(file "/usr/bin/dislocate" line 264)
Killed
expect
Programmed dialogue with interactive programs, Version 5 Programmed dialogue with interactive programs, Version 5
root@kali:~# expect -h
expect: invalid option -- 'h'
usage: expect [-div] [-c cmds] [[-f] cmdfile] [args]
expect_autoexpect
Generate an Expect script from watching a session
root@kali:~# man expect_autoexpect
AUTOEXPECT(1) General Commands Manual AUTOEXPECT(1)
NAME
autoexpect - generate an Expect script from watching a session
SYNOPSIS
autoexpect [ args ] [ program args... ]
INTRODUCTION
autoexpect watches you interacting with another program and creates an
Expect script that reproduces your interactions. For straightline
scripts, autoexpect saves substantial time over writing scripts by
hand. Even if you are an Expect expert, you will find it convenient to
use autoexpect to automate the more mindless parts of interactions. It
is much easier to cut/paste hunks of autoexpect scripts together than
to write them from scratch. And if you are a beginner, you may be able
to get away with learning nothing more about Expect than how to call
autoexpect.
The simplest way to use autoexpect is to call it from the command line
with no arguments. For example:
% autoexpect
By default, autoexpect spawns a shell for you. Given a program name
and arguments, autoexpect spawns that program. For example:
% autoexpect ftp ftp.cme.nist.gov
Once your spawned program is running, interact normally. When you have
exited the shell (or program that you specified), autoexpect will cre-
ate a new script for you. By default, autoexpect writes the new script
to "script.exp". You can override this with the -f flag followed by a
new script name.
The following example runs "ftp ftp.cme.nist.gov" and stores the re-
sulting Expect script in the file "nist".
% autoexpect -f nist ftp ftp.cme.nist.gov
It is important to understand that autoexpect does not guarantee a
working script because it necessarily has to guess about certain things
- and occasionally it guesses wrong. However, it is usually very easy
to identify and fix these problems. The typical problems are:
o Timing. A surprisingly large number of programs (rn, ksh,
zsh, telnet, etc.) and devices (e.g., modems) ignore key-
strokes that arrive "too quickly" after prompts. If you
find your new script hanging up at one spot, try adding a
short sleep just before the previous send.
You can force this behavior throughout by overriding the
variable "force_conservative" near the beginning of the gen-
erated script. This "conservative" mode makes autoexpect
automatically pause briefly (one tenth of a second) before
sending each character. This pacifies every program I know
of.
This conservative mode is useful if you just want to quickly
reassure yourself that the problem is a timing one (or if
you really don't care about how fast the script runs). This
same mode can be forced before script generation by using
the -c flag.
Fortunately, these timing spots are rare. For example, tel-
net ignores characters only after entering its escape se-
quence. Modems only ignore characters immediately after
connecting to them for the first time. A few programs ex-
hibit this behavior all the time but typically have a switch
to disable it. For example, rn's -T flag disables this be-
havior.
The following example starts autoexpect in conservative
mode.
autoexpect -c
The -C flag defines a key to toggle conservative mode. The
following example starts autoexpect (in non-conservative
mode) with ^L as the toggle. (Note that the ^L is entered
literally - i.e., enter a real control-L).
autoexpect -C ^L
The following example starts autoexpect in conservative mode
with ^L as the toggle.
autoexpect -c -C ^L
o Echoing. Many program echo characters. For example, if you
type "more" to a shell, what autoexpect actually sees is:
you typed 'm',
computer typed 'm',
you typed 'o',
computer typed 'o',
you typed 'r',
computer typed 'r',
...
Without specific knowledge of the program, it is impossible
to know if you are waiting to see each character echoed be-
fore typing the next. If autoexpect sees characters being
echoed, it assumes that it can send them all as a group
rather than interleaving them the way they originally ap-
peared. This makes the script more pleasant to read. How-
ever, it could conceivably be incorrect if you really had to
wait to see each character echoed.
o Change. Autoexpect records every character from the inter-
action in the script. This is desirable because it gives
you the ability to make judgements about what is important
and what can be replaced with a pattern match.
On the other hand, if you use commands whose output differs
from run to run, the generated scripts are not going to be
correct. For example, the "date" command always produces
different output. So using the date command while running
autoexpect is a sure way to produce a script that will re-
quire editing in order for it to work.
The -p flag puts autoexpect into "prompt mode". In this
mode, autoexpect will only look for the the last line of
program output - which is usually the prompt. This handles
the date problem (see above) and most others.
The following example starts autoexpect in prompt mode.
autoexpect -p
The -P flag defines a key to toggle prompt mode. The fol-
lowing example starts autoexpect (in non-prompt mode) with
^P as the toggle. Note that the ^P is entered literally -
i.e., enter a real control-P.
autoexpect -P ^P
The following example starts autoexpect in prompt mode with
^P as the toggle.
autoexpect -p -P ^P
OTHER FLAGS
The -quiet flag disables informational messages produced by autoexpect.
The -Q flag names a quote character which can be used to enter charac-
ters that autoexpect would otherwise consume because they are used as
toggles.
The following example shows a number of flags with quote used to pro-
vide a way of entering the toggles literally.
autoexpect -P ^P -C ^L -Q ^Q
STYLE
I don't know if there is a "style" for Expect programs but autoexpect
should definitely not be held up as any model of style. For example,
autoexpect uses features of Expect that are intended specifically for
computer-generated scripting. So don't try to faithfully write scripts
that appear as if they were generated by autoexpect. This is not use-
ful.
On the other hand, autoexpect scripts do show some worthwhile things.
For example, you can see how any string must be quoted in order to use
it in a Tcl script simply by running the strings through autoexpect.
SEE ALSO
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
AUTHOR
Don Libes, National Institute of Standards and Technology
expect and autoexpect are in the public domain. NIST and I would ap-
preciate credit if these programs or parts of them are used.
30 June 1995 AUTOEXPECT(1)
expect_autopasswd
root@kali:~# expect_autopasswd -h
spawn passwd -h
Usage: passwd [options] [LOGIN]
Options:
-a, --all report password status on all accounts
-d, --delete delete the password for the named account
-e, --expire force expire the password for the named account
-h, --help display this help message and exit
-k, --keep-tokens change password only if expired
-i, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-l, --lock lock the password of the named account
-n, --mindays MIN_DAYS set minimum number of days before password
change to MIN_DAYS
-q, --quiet quiet mode
-r, --repository REPOSITORY change password in REPOSITORY repository
-R, --root CHROOT_DIR directory to chroot into
-S, --status report password status on the named account
-u, --unlock unlock the password of the named account
-w, --warndays WARN_DAYS set expiration warning days to WARN_DAYS
-x, --maxdays MAX_DAYS set maximum number of days before password
change to MAX_DAYS
expect_cryptdir
Encrypt/decrypt all files in a directory
root@kali:~# expect_cryptdir -h
This example requires the mcrypt package.
expect_decryptdir
Encrypt/decrypt all files in a directory
root@kali:~# expect_decryptdir -h
This example requires the mcrypt package.
expect_dislocate
Disconnect and reconnect processes
root@kali:~# expect_dislocate -h
bad flag "-h": must be -console, -ignore, -leaveopen, -noecho, -nottycopy, -nottyinit, -open, or -pty
while executing
"spawn -h"
("eval" body line 1)
invoked from within
"eval spawn $argv"
(procedure "child" line 11)
invoked from within
"child $datearg $argv"
invoked from within
"if {$argc} {
# initial creation occurs before fork because if we do it after
# then either the child or the parent may have to spin retrying
..."
(file "/usr/bin/expect_dislocate" line 264)
Killed
expect_ftp-rfc
root@kali:~# expect_ftp-rfc -h
spawn ftp ftp.uu.net
expect_kibitz
Allow two people to interact with one shell
root@kali:~# man expect_kibitz
KIBITZ(1) General Commands Manual KIBITZ(1)
NAME
kibitz - allow two people to interact with one shell
SYNOPSIS
kibitz [ kibitz-args ] user [ program program-args... ]
kibitz [ kibitz-args ] user@host [ program program-args... ]
INTRODUCTION
kibitz allows two (or more) people to interact with one shell (or any
arbitrary program). Uses include:
o A novice user can ask an expert user for help. Using kib-
itz, the expert can see what the user is doing, and offer
advice or show how to do it right.
o By running kibitz and then starting a full-screen editor,
people may carry out a conversation, retaining the ability
to scroll backwards, save the entire conversation, or even
edit it while in progress.
o People can team up on games, document editing, or other co-
operative tasks where each person has strengths and weak-
nesses that complement one another.
USAGE
To start kibitz, user1 runs kibitz with the argument of the user to
kibitz. For example:
kibitz user2
kibitz starts a new shell (or another program, if given on the command
line), while prompting user2 to run kibitz. If user2 runs kibitz as
directed, the keystrokes of both users become the input of the shell.
Similarly, both users receive the output from the shell.
To terminate kibitz it suffices to terminate the shell itself. For ex-
ample, if either user types ^D (and the shell accepts this to be EOF),
the shell terminates followed by kibitz.
Normally, all characters are passed uninterpreted. However, if the es-
cape character (described when kibitz starts) is issued, the user may
talk directly to the kibitz interpreter. Any Expect(1) or Tcl(3) com-
mands may be given. Also, job control may be used while in the inter-
preter, to, for example, suspend or restart kibitz.
Various processes can provide various effects. For example, you can
emulate a two-way write(1) session with the command:
kibitz user2 sleep 1000000
ARGUMENTS
kibitz takes arguments, these should also be separated by whitespace.
The -noproc flag runs kibitz with no process underneath. Characters
are passed to the other kibitz. This is particularly useful for con-
necting multiple interactive processes together. In this mode, charac-
ters are not echoed back to the typist.
-noescape disables the escape character.
-escape char sets the escape character. The default escape character
is ^].
-silent turns off informational messages describing what kibitz is do-
ing to initiate a connection.
-tty ttyname defines the tty to which the invitation should be sent.
If you start kibitz to user2 on a remote computer, kibitz performs a
rlogin to the remote computer with your current username. The flag
-proxy username causes rlogin to use username for the remote login
(e.g. if your account on the remote computer has a different username).
If the -proxy flag is not given, kibitz tries to determine your current
username by (in that order) inspecting the environment variables USER
and LOGNAME, then by using the commands whoami and logname.
The arguments -noescape and -escape can also be given by user2 when
prompted to run kibitz.
MORE THAN TWO USERS
The current implementation of kibitz explicitly understands only two
users, however, it is nonetheless possible to have a three (or more)
-way kibitz, by kibitzing another kibitz. For example, the following
command runs kibitz with the current user, user2, and user3:
% kibitz user2 kibitz user3
Additional users may be added by simply appending more "kibitz user"
commands.
The xkibitz script is similar to kibitz but supports the ability to add
additional users (and drop them) dynamically.
CAVEATS
kibitz assumes the 2nd user has the same terminal type and size as the
1st user. If this assumption is incorrect, graphical programs may dis-
play oddly.
kibitz handles character graphics, but cannot handle bitmapped graph-
ics. Thus,
% xterm -e kibitz will work
% kibitz xterm will not work
However, you can get the effect of the latter command by using xkibitz
(see SEE ALSO below). kibitz uses the same permissions as used by
rlogin, rsh, etc. Thus, you can only kibitz to users at hosts for
which you can rlogin. Similarly, kibitz will prompt for a password on
the remote host if rlogin would.
If you kibitz to users at remote hosts, kibitz needs to distinguish
your prompt from other things that may precede it during login. (Ide-
ally, the end of it is preferred but any part should suffice.) If you
have an unusual prompt, set the environment variable EXPECT_PROMPT to
an egrep(1)-style regular expression. Brackets should be preceded with
one backslash in ranges, and three backslashes for literal brackets.
The default prompt r.e. is "($|%|#) ".
kibitz requires the kibitz program on both hosts. kibitz requires ex-
pect(1).
By comparison, the xkibitz script uses the X authorization mechanism
for inter-host communication so it does not need to login, recognize
your prompt, or require kibitz on the remote host. It does however
need permission to access the other X servers.
BUGS
An early version of Sun's tmpfs had a bug in it that causes kibitz to
blow up. If kibitz reports "error flushing ...: Is a directory" ask
Sun for patch #100174.
If your Expect is not compiled with multiple-process support (i.e., you
do not have a working select or poll), you will not be able to run kib-
itz.
ENVIRONMENT
The environment variable SHELL is used to determine the shell to start,
if no other program is given on the command line.
If the environment variable EXPECT_PROMPT exists, it is taken as a reg-
ular expression which matches the end of your login prompt (but does
not otherwise occur while logging in). See also CAVEATS above.
If the environment variables USER or LOGNAME are defined, they are used
to determine the current user name for a kibitz to a remote computer.
See description of the -proxy option in ARGUMENTS above.
SEE ALSO
Tcl(3), libexpect(3), xkibitz(1)
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
"Kibitz - Connecting Multiple Interactive Programs Together", by Don
Libes, Software - Practice & Experience, John Wiley & Sons, West Sus-
sex, England, Vol. 23, No. 5, May, 1993.
AUTHOR
Don Libes, National Institute of Standards and Technology
kibitz is in the public domain. NIST and I would appreciate credit if
this program or parts of it are used.
19 October 1994 KIBITZ(1)
expect_lpunlock
root@kali:~# expect_lpunlock -h
spawn ed /etc/printcap
expect_mkpasswd
Generate new password, optionally apply it to a user
root@kali:~# expect_mkpasswd -h
Es%3pe7Zz
expect_multixterm
Drive multiple xterms separately or together
root@kali:~# man expect_multixterm
MULTIXTERM(1) General Commands Manual MULTIXTERM(1)
NAME
multixterm - drive multiple xterms separately or together
SYNOPSIS
multixterm [ args ]
DESCRIPTION
Multixterm creates multiple xterms that can be driven together or sepa-
rately.
In its simplest form, multixterm is run with no arguments and commands
are interactively entered in the first entry field. Press return (or
click the "new xterm" button) to create a new xterm running that com-
mand.
Keystrokes in the "stdin window" are redirected to all xterms started
by multixterm. xterms may be driven separately simply by focusing on
them.
The stdin window must have the focus for keystrokes to be sent to the
xterms. When it has the focus, the color changes to aquamarine. As
characters are entered, the color changes to green for a second. This
provides feedback since characters are not echoed in the stdin window.
Typing in the stdin window while holding down the alt or meta keys
sends an escape character before the typed characters. This provides
support for programs such as emacs.
ARGUMENTS
-xa The optional -xa argument indicates arguments to pass to
xterm.
-xc The optional -xc argument indicates a command to be run in
each named xterm (see -xn). With no -xc argument, the com-
mand is the current shell.
-xd The optional -xd argument indicates a directory to search
for files that will appear in the Files menu. By default,
the directory is: ~/lib/multixterm
-xf The optional -xf argument indicates a file to be read at
startup. See FILES below for more info.
-xn The optional -xn argument indicates a name for each xterm.
This name will also be substituted for any %n in the command
argument (see -xc).
-xv The optional -xv flag puts multixterm into a verbose mode
where it will describe some of the things it is doing inter-
nally. The verbose output is not intended to be understand-
able to anyone but the author.
Less common options may be changed by the startup file (see FILES be-
low).
All the usual X and wish flags are supported (i.e., -display, -name).
There are so many of them that to avoid colliding and make them easy to
remember, all the multixterm flags begin with -x.
If any arguments do not match the flags above, the remainder of the
command line is made available for user processing. By default, the
remainder is used as a list of xterm names in the style of -xn. The
default behavior may be changed using the .multixtermrc file (see DOT
FILE below).
EXAMPLE COMMAND LINE ARGUMENTS
The following command line starts up two xterms using ssh to the hosts
bud and dexter.
multixterm -xc "ssh %n" bud dexter
FILES
Command files may be used to drive or initialize multixterm. The File
menu may be used to invoke other files. If files exist in the command
file directory (see -xd above), they will appear in the File menu.
Files may also be loaded by using File->Open. Any filename is accept-
able but the File->Open browser defaults to files with a .mxt suffix.
Files are written in Tcl and may change any variables or invoke any
procedures. The primary variables of interest are 'xtermCmd' which
identifies the command (see -xc) and 'xtermNames' which is a list of
names (see -xn). The procedure xtermStartAll, starts xterms for each
name in the list. Other variables and procedures may be discovered by
examining multixterm itself.
EXAMPLE FILE
The following file does the same thing as the earlier example command
line:
# start two xterms connected to bud and dexter
set xtermCmd "ssh %n"
set xtermNames {bud dexter}
xtermStartAll
DOT FILE
At startup, multixterm reads ~/.multixtermrc if present. This is simi-
lar to the command files (see FILES above) except that .multixtermrc
may not call xtermStartAll. Instead it is called implicitly, similar
to the way that it is implicit in the command line use of -xn.
The following example .multixtermrc file makes every xterm run ssh to
the hosts named on the command line.
set xtermCmd "ssh %n"
Then multixterm could be called simply:
multixterm bud dexter
If any command-line argument does not match a multixterm flag, the re-
mainder of the command line is made available to .multixtermrc in the
argv variable. If argv is non-empty when .multixtermrc returns, it is
assigned to xtermNames unless xtermNames is non-empty in which case,
the content of argv is ignored.
Commands from multixterm are evaluated early in the initialization of
multixterm. Anything that must be done late in the initialization
(such as adding additional bindings to the user interface) may be done
by putting the commands inside a procedure called "initLate".
MENUS
Except as otherwise noted, the menus are self-explanatory. Some of the
menus have dashed lines as the first entry. Clicking on the dashed
lines will "tear off" the menus.
USAGE SUGGESTION - ALIASES AND COMMAND FILES
Aliases may be used to store lengthy command-line invocations. Command
files can be also be used to store such invocations as well as provid-
ing a convenient way to share configurations.
Tcl is a general-purpose language. Thus multixterm command files can
be extremely flexible, such as loading hostnames from other programs or
files that may change from day-to-day. In addition, command files can
be used for other purposes. For example, command files may be used to
prepared common canned interaction sequences. For example, the command
to send the same string to all xterms is:
xtermSend "a particularly long string"
The File menu (torn-off) makes canned sequences particularly conve-
nient. Interactions could also be bound to a mouse button, keystroke,
or added to a menu via the .multixtermrc file.
The following .multixtermrc causes tiny xterms to tile across and down
the screen. (You may have to adjust the parameters for your screen.)
This can be very helpful when dealing with large numbers of xterms.
set yPos 0
set xPos 0
trace variable xtermArgs r traceArgs
proc traceArgs {args} {
global xPos yPos
set ::xtermArgs "-geometry 80x12+$xPos+$yPos -font 6x10"
if {$xPos} {
set xPos 0
incr yPos 145
if {$yPos > 800} {set yPos 0}
} else {
set xPos 500
}
}
The xtermArgs variable in the code above is the variable corresponding
to the -xa argument.
xterms can be also be created directly. The following command file
creates three xterms overlapped horizontally:
set xPos 0
foreach name {bud dexter hotdog} {
set ::xtermArgs "-geometry 80x12+$xPos+0 -font 6x10"
set ::xtermNames $name
xtermStartAll
incr xPos 300
}
USAGE SUGGESTION - SELECTING HOSTS BY NICKNAME
The following .multixtermrc shows an example of changing the default
handling of the arguments from hostnames to a filename containing host-
names:
set xtermNames [exec cat $argv]
The following is a variation, retrieving the host names from the yp
database:
set xtermNames [exec ypcat $argv]
The following hardcodes two sets of hosts, so that you can call multix-
term with either "cluster1" or "cluster2":
switch $argv {
cluster1 {
set xtermNames "bud dexter"
}
cluster2 {
set xtermNames "frank hotdog weiner"
}
}
COMPARE/CONTRAST
It is worth comparing multixterm to xkibitz. Multixterm connects a
separate process to each xterm. xkibitz connects the same process to
each xterm.
LIMITATIONS
Multixterm provides no way to remotely control scrollbars, resize, and
most other window system related functions.
Because xterm has no mechanism for propagating size information to ex-
ternal processes, particularly for character graphic applications
(e.g., vi, emacs), you may have to manually ensure that the spawned
process behind each xterm has the correct size. For example, if you
create or set the xterm to a size, you may have to send an explicit
stty command with the correct size to the spawned process(es). Alter-
natively, you can add the correct size argument when an xterm is cre-
ated (i.e., "-geometry 80x20").
Multixterm can only control new xterms that multixterm itself has
started.
As a convenience, the File menu shows a limited number of files. To
show all the files, use File->Open.
FILES
$DOTDIR/.multixtermrc initial command file
~/.multixtermrc fallback command file
~/lib/multixterm/ default command file directory
BUGS
If multixterm is killed using an uncatchable kill, the xterms are not
killed. This appears to be a bug in xterm itself.
Send/expect sequences can be done in multixterm command files. How-
ever, due to the richness of the possibilities, to document it properly
would take more time than the author has at present.
REQUIREMENTS
Requires Expect 5.36.0 or later.
Requires Tk 8.3.3 or later.
VERSION
This man page describes version 1.8 of multixterm.
The latest version of multixterm is available from http://ex-
pect.nist.gov/example/multixterm . If your version of Expect and Tk
are too old (see REQUIREMENTS above), download a new version of Expect
from http://expect.nist.gov
DATE
April 30, 2002
AUTHOR
Don Libes <[email protected]>
LICENSE
Multixterm is in the public domain; however the author would appreciate
acknowledgement if multixterm or parts of it or ideas from it are used.
16 August 2002 MULTIXTERM(1)
expect_passmass
Change password on multiple machines
root@kali:~# man expect_passmass
PASSMASS(1) General Commands Manual PASSMASS(1)
NAME
passmass - change password on multiple machines
SYNOPSIS
passmass [ host1 host2 host3 ... ]
INTRODUCTION
Passmass changes a password on multiple machines. If you have accounts
on several machines that do not share password databases, Passmass can
help you keep them all in sync. This, in turn, will make it easier to
change them more frequently.
When Passmass runs, it asks you for the old and new passwords. (If you
are changing root passwords and have equivalencing, the old password is
not used and may be omitted.)
Passmass understands the "usual" conventions. Additional arguments may
be used for tuning. They affect all hosts which follow until another
argument overrides it. For example, if you are known as "libes" on
host1 and host2, but "don" on host3, you would say:
passmass host1 host2 -user don host3
Arguments are:
-user
User whose password will be changed. By default, the cur-
rent user is used.
-rlogin
Use rlogin to access host. (default)
-slogin
Use slogin to access host.
-ssh
Use ssh to access host.
-telnet
Use telnet to access host.
-program
Next argument is a program to run to set the password. De-
fault is "passwd". Other common choices are "yppasswd" and
"set passwd" (e.g., VMS hosts). A program name such as
"password fred" can be used to create entries for new ac-
counts (when run as root).
-prompt
Next argument is a prompt suffix pattern. This allows the
script to know when the shell is prompting. The default is
"# " for root and "% " for non-root accounts.
-timeout
Next argument is the number of seconds to wait for re-
sponses. Default is 30 but some systems can be much slower
logging in.
-su
Next argument is 1 or 0. If 1, you are additionally
prompted for a root password which is used to su after log-
ging in. root's password is changed rather than the user's.
This is useful for hosts which do not allow root to log in.
HOW TO USE
The best way to run Passmass is to put the command in a one-line shell
script or alias. Whenever you get a new account on a new machine, add
the appropriate arguments to the command. Then run it whenever you
want to change your passwords on all the hosts.
CAVEATS
Using the same password on multiple hosts carries risks. In particu-
lar, if the password can be stolen, then all of your accounts are at
risk. Thus, you should not use Passmass in situations where your pass-
word is visible, such as across a network which hackers are known to
eavesdrop.
On the other hand, if you have enough accounts with different pass-
words, you may end up writing them down somewhere - and that can be a
security problem. Funny story: my college roommate had an 11"x13"
piece of paper on which he had listed accounts and passwords all across
the Internet. This was several years worth of careful work and he car-
ried it with him everywhere he went. Well one day, he forgot to remove
it from his jeans, and we found a perfectly blank sheet of paper when
we took out the wash the following day!
SEE ALSO
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
AUTHOR
Don Libes, National Institute of Standards and Technology
7 October 1993 PASSMASS(1)
expect_rftp
root@kali:~# expect_rftp -h
Once logged in, cd to the directory to be transferred and press:
~p to put the current directory from the local to the remote host
~g to get the current directory from the remote host to the local host
~l to list the current directory from the remote host
spawn ftp -h
expect_rlogin-cwd
root@kali:~# expect_rlogin-cwd -h
spawn rlogin -h
rlogin: invalid option -- 'h'
rlogin: Unknown option!
Usage: rlogin [-46v] [-l user] [-p port] [user@]host
expect_timed-read
expect_timed-run
root@kali:~# expect_timed-run -h
usage: spawn [spawn-args] program [program-args]
while executing
"spawn"
("eval" body line 1)
invoked from within
"eval spawn [lrange $argv 1 end]"
(file "/usr/bin/expect_timed-run" line 12)
expect_tknewsbiff
Pop up a window when news appears
root@kali:~# man expect_tknewsbiff
TKNEWSBIFF(1) General Commands Manual TKNEWSBIFF(1)
NAME
tknewsbiff - pop up a window when news appears
SYNOPSIS
tknewsbiff [ server or config-file ]
INTRODUCTION
tknewsbiff pops up a window when there is unread news in your favorite
newsgroups and removes the window after you've read the news. tknewsb-
iff can optionally play a sound, start your newsreader, etc.
SELECTING NEWSGROUPS
By default, the configuration file ~/.tknewsbiff describes how tknewsb-
iff behaves. The syntax observes the usual Tcl rules - however, even
if you don't know Tcl, all but the most esoteric configurations will be
obvious.
Each newsgroup (or set of newsgroups) to be watched is described by us-
ing the "watch" command. For example:
watch dc.dining
watch nist.*
watch comp.unix.wizard -threshold 3
watch *.sources.* -threshold 20
For each newsgroup pattern, any newsgroup that matches it and which you
are subscribed to (according to your newsrc file) is eligible for re-
porting. By default, tknewsbiff reports on the newsgroup if there is
at least one unread article. The "-threshold" flag changes the thresh-
old to the following number. For example, "-threshold 3" means there
must be at least three articles unread before tknewsbiff will report
the newsgroup.
If no watch commands are given (or no configuration file exists), all
groups which are subscribed to are watched.
To suppress newsgroups that would otherwise be reported, use the "ig-
nore" command. For example, the following matches all comp.* and
nist.* newgroups except for nist.posix or .d (discussion) groups:
watch comp.*
watch nist.*
ignore nist.posix.*
ignore *.d
The flag "-new" describes a command to be executed when the newsgroup
is first reported as having unread news. For example, the following
lines invoke the UNIX command "play" to play a sound.
watch dc.dining -new "exec play /usr/local/sounds/yumyum.au"
watch rec.auto* -new "exec play /usr/local/sounds/vroom.au"
You can cut down on the verbosity of actions by defining procedures.
For example, if you have many -new flags that all play sound files, you
could define a sound procedure. This would allow the -new specifica-
tion to be much shorter.
proc play {sound} {
exec play /usr/local/sounds/$sound.au
}
watch dc.dining -new "play yumyum"
watch rec.auto* -new "play vroom"
As an aside, you can put an "&" at the end of an "exec" command to get
commands to execute asynchronously. However, it's probably not a good
idea to do this when playing sound files anyway.
"newsgroup" is a read-only variable which contains the name of the
newsgroup that is being reported. This is useful when the action is
triggered by a pattern. For example, the following line could run the
newsgroup name through a speech synthesizer:
watch * -new {
exec play herald.au
exec speak "New news has arrived in $newsgroup."
}
The flag "-display" describes a command to be executed every time the
newsgroup is reported as having unread news. The special command "dis-
play" is the default command. It schedules $newsgroup to be written to
tknewsbiff's display when it is rewritten. For example, by explicitly
providing a -display flag that omits the display command, you can dis-
able the display of newsgroups that are already reported via -new.
watch dc.dining -new {exec play yumyum.au} -display {}
If you want to execute an action repeatedly and still display the news-
group in the default manner, explicitly invoke the display command via
the -display flag. For example:
watch *security* -display {
exec play red-alert.au
display
}
Actions associated with the -new and -display flags are executed only
once for each matching newsgroup. The command executed is the one as-
sociated with the first pattern in the configuration file that matches
and observes the given threshold.
Any command that is simply listed in the configuration file is executed
each time before the update loop in tknewsbiff. The reserved (but
user-defined) procedure "user" is run immediately after the newsgroups
are scheduled to be written to the display and before they are actually
written.
For example, suppose unread articles appear in several rec.auto groups
and you play the same sound for each one. To prevent playing the sound
several times in a row, make the -new command simply set a flag. In
the user procedure, play the sound if the flag is set (and then reset
the flag).
The user procedure could also be used to start a newsreader. This
would avoid the possibility of starting multiple newsreaders just be-
cause multiple newsgroups contained unread articles. (A check should,
of course, be made to make sure that a newsreader is not already run-
ning.)
MORE VARIABLES
The following example lines show variables that can affect the behavior
of tknewsbiff
set delay 120
set server news.nist.gov
set server_timeout 60
set newsrc ~/.newsrc
set width 40
set height 20
set active_file /usr/news/lib/active
tknewsbiff alternates between checking for unread news and sleeping
(kind of like many undergraduates). The "delay" variable describes how
many seconds to sleep.
The "server" variable names an NNTP news-server. The default is
"news". The "server" variable is only used if the "active_file" vari-
able is not set.
The "server_timeout" variable describes how how many seconds to wait
for a response from the server before giving up. -1 means wait forever
or until the server itself times out. The default is 60 seconds.
The "newsrc" variable describes the name of your .newsrc file. By de-
fault, tknewsbiff looks in your home directory for a newsrc file. A
server-specific newsrc is used if found. For example, if you have set
server to "cubit.nist.gov", then tknewsbiff looks for ~/.newsrc-cu-
bit.nist.gov. (This is the Emacs gnus convention - which is very con-
venient when you read news from multiple servers.) If there is no
server-specific newsrc, tknewsbiff uses ~/.newsrc.
The "width" variable describes the width that tknewsbiff will use to
display information. If any newsgroup names are long enough, they will
be truncated so that the article counts can still be shown. You can
manually resize the window to see what was truncated. However, if your
configuration file sets the width variable, the window will be restored
to that size the next time that tknewsbiff checks for unread news and
updates its display.
The "height" variable describes the maximum height that tknewsbiff will
use to display information. If fewer newsgroups are reported, tknewsb-
iff will shrink the window appropriately. You can manually resize the
window but if your configuration file sets the height variable, the
window will be restored to that size the next time that tknewsbiff
checks for unread news and updates its display.
The "active_file" variable describes the name of the news active file.
If set, the active file is read directly in preference to using NNTP
(even if the "server" variable is set). This is particularly useful
for testing out new configuration files since you can edit a fake ac-
tive file and then click button 2 to immediately see how tknewsbiff re-
sponds (see BUTTONS below).
If the environment variable DOTDIR is set, then its value is used as a
directory in which to find all dotfiles instead of from the home direc-
tory. In particular, this affects the tknewsbiff configuration file
and the .newsrc file (assuming the newsrc variable is not set explic-
itly).
WATCHING DIFFERENT NEWS SERVERS
To watch multiple servers, run tknewsbiff multiple times. (Since you
need different .newsrc files and the servers have different newsgroups
and article numbers anyway, there is no point in trying to do this in a
single process.)
You can point tknewsbiff at a different server with an appropriate ar-
gument. The argument is tried both as a configuration file name and as
a suffix to the string "~/.tknewsbiff-". So if you want to watch the
server "kidney", store the tknewsbiff configuration information in
~/.tknewsbiff-kidney". The following two commands will both use that
configuration file.
tknewsbiff kidney
tknewsbiff ~/.tknewsbiff-kidney
In both cases, the actual server to contact is set by the value of the
server variable in the configuration file.
If no configuration file is found, the argument is used as the server
to contact. This allows tknewsbiff to be run with no preparation what-
soever.
If the argument is the special keyword "active" (or ends in "/active"),
it is used as the name of an active file. This is in turn used to ini-
tialize the variable "active_file" so that tknewsbiff reads from the
active file directly rather than using NNTP.
Creating your own active file is a convenient way of testing your con-
figuration file. For example, after running the following command, you
can repeatedly edit your active file and trigger the update-now command
(either by pressing button 2 or setting the delay variable very low) to
see how tknewsbiff responds.
The active file must follow the format of a real active file. The for-
mat is one newsgroup per line. After the newsgroup name is the number
of the highest article, the lowest article. Lastly is the letter y or
m. m means the newsgroup is moderated. y means posting is allowed.
WINDOW
When unread news is found, a window is popped up. The window lists the
names of the newsgroups and the number of unread articles in each (un-
less suppressed by the -display flag). When there is no longer any un-
read news, the window disappears (although the process continues to
run).
BUTTONS
Button or key bindings may be assigned by bind commands. Feel free to
change them. The default bind commands are:
bind .list <1> help
bind .list <2> update-now
bind .list <3> unmapwindow
By default button 1 (left) is bound to "help". The help command causes
tknewsbiff to pop up a help window.
By default, button 2 (middle) is bound to "update-now". The update-now
command causes tknewsbiff to immediately check for unread news. If
your news server is slow or maintains a very large number of news-
groups, or you have a large number of patterns in your configuration
file, tknewsbiff can take considerable time before actually updating
the window.
By default, button 3 (right) is bound to "unmapwindow". The unmapwin-
dow command causes tknewsbiff to remove the window from the display un-
til the next time it finds unread news. (The mapwindow command causes
tknewsbiff to restore the window.)
As an example, here is a binding to pop up an xterm and run rn when you
hold down the shift key and press button 1 in the listing window.
bind .list <Shift-1> {
exec xterm -e rn &
}
Here is a similar binding. However it tells rn to look only at the
newsgroup that is under the mouse when you pressed it. (The "dis-
play_list" variable is described later in this man page.)
bind .list <Shift-1> {
exec xterm -e rn [lindex $display_list [.list nearest %y]] &
}
OTHER COMMANDS AND VARIABLES
Built-in commands already mentioned are: watch, ignore, display, help,
update-now, unmapwindow, and mapwindow.
Any Tcl and Tk command can also be given. In particular, the list of
newsgroups is stored in the list widget ".list", and the scroll bar is
stored in the scrollbar widget ".scroll". So for example, if you want
to change the foreground and background colors of the newsgroup list,
you can say:
.list config -bg honeydew1 -fg orchid2
These can also be controlled by the X resource database as well. How-
ever, the configuration file allows arbitrarily complex commands to be
evaluated rather than simple assignments.
Certain Tcl/Tk commands can disrupt proper function of tknewsbiff.
These will probably be obvious to anyone who knows enough to give these
commands in the first place. As a simple example, the program assumes
the font in the list box is of fixed width. The newsgroups will likely
not align if you use a variable-width font.
The following variables are accessible and can be used for esoteric
uses. All other variables are private. Private variables and commands
begin with "_" so you don't need to worry about accidental collisions.
The array "db" is a database which maintains information about read and
unread news. db($newsgroup,hi) is the highest article that exists.
db($newsgroup,seen) is the highest article that you have read.
A number of lists maintain interesting information. "active_list" is a
list of known newsgroups. "seen_list" is a list of newsgroups that
have been seen so far as the -new and -display flags are being
processed. "previous_seen_list" is "seen_list" from the previous cy-
cle. "ignore_list" is the list of newsgroup patterns to ignore.
"watch_list" is the list of newsgroup patterns to watch. "dis-
play_list" is the list of newsgroup will be displayed at the next op-
portunity.
UPDATING YOUR FILES
tknewsbiff automatically rereads your configuration file each time it
wakes up to check for unread news. To force tknewsbiff to reread the
file immediately (such as if you are testing a new configuration or
have just modified your newsrc file), press button 2 in the display
(see BUTTONS above).
CAVEATS
tknewsbiff defines the number of unread articles as the highest exist-
ing article minus the highest article that you've read. So if you've
read the last article in the newsgroup but no others, tknewsbiff thinks
there are no unread articles. (It's impossible to do any better by
reading the active file and it would be very time consuming to do this
more accurately via NNTP since servers provide no efficient way of re-
porting their own holes in the newsgroups.) Fortunately, this defini-
tion is considered a feature by most people. It allows you to read ar-
ticles and then mark them "unread" but not have tknewsbiff continue
telling you that they are unread.
UNWARRANTED CONCERNS
Your news administrator may wonder if many people using tknewsbiff se-
verely impact an NNTP server. In fact, the impact is negligible even
when the delay is very low. To gather all the information it needs,
tknewsbiff uses a single NNTP query - it just asks for the active file.
The NNTP server does no computation, formatting, etc, it just sends the
file. All the interesting processing happens locally in the tknewsbiff
program itself.
BUGS
The man page is longer than the program.
SEE ALSO
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
AUTHOR
Don Libes, National Institute of Standards and Technology
1 January 1994 TKNEWSBIFF(1)
expect_tkpasswd
expect_unbuffer
Unbuffer output
root@kali:~# expect_unbuffer -h
bad flag "-h": must be -console, -ignore, -leaveopen, -noecho, -nottycopy, -nottyinit, -open, or -pty
while executing
"spawn -noecho -h"
("eval" body line 1)
invoked from within
"eval [list spawn -noecho] $argv"
invoked from within
"if {[string compare [lindex $argv 0] "-p"] == 0} {
# pipeline
set stty_init "-echo"
eval [list spawn -noecho] [lrange $argv 1 end]
clo..."
(file "/usr/bin/expect_unbuffer" line 13)
expect_weather
root@kali:~# expect_weather -h
spawn telnet rainmaker.wunderground.com 3000
Trying 35.160.169.47...
expect_xkibitz
Allow multiple people to interact in an xterm
root@kali:~# expect_xkibitz -h
bad flag "-h": must be -console, -ignore, -leaveopen, -noecho, -nottycopy, -nottyinit, -open, or -pty
while executing
"spawn -noecho -h"
("eval" body line 1)
invoked from within
"eval spawn -noecho $argv"
invoked from within
"if {[llength $argv]>0} {
eval spawn -noecho $argv
} else {
spawn -noecho $env(SHELL)
}"
(file "/usr/bin/expect_xkibitz" line 201)
expect_xpstat
ftp-rfc
root@kali:~# ftp-rfc -h
spawn ftp ftp.uu.net
kibitz
Allow two people to interact with one shell
root@kali:~# man kibitz
KIBITZ(1) General Commands Manual KIBITZ(1)
NAME
kibitz - allow two people to interact with one shell
SYNOPSIS
kibitz [ kibitz-args ] user [ program program-args... ]
kibitz [ kibitz-args ] user@host [ program program-args... ]
INTRODUCTION
kibitz allows two (or more) people to interact with one shell (or any
arbitrary program). Uses include:
o A novice user can ask an expert user for help. Using kib-
itz, the expert can see what the user is doing, and offer
advice or show how to do it right.
o By running kibitz and then starting a full-screen editor,
people may carry out a conversation, retaining the ability
to scroll backwards, save the entire conversation, or even
edit it while in progress.
o People can team up on games, document editing, or other co-
operative tasks where each person has strengths and weak-
nesses that complement one another.
USAGE
To start kibitz, user1 runs kibitz with the argument of the user to
kibitz. For example:
kibitz user2
kibitz starts a new shell (or another program, if given on the command
line), while prompting user2 to run kibitz. If user2 runs kibitz as
directed, the keystrokes of both users become the input of the shell.
Similarly, both users receive the output from the shell.
To terminate kibitz it suffices to terminate the shell itself. For ex-
ample, if either user types ^D (and the shell accepts this to be EOF),
the shell terminates followed by kibitz.
Normally, all characters are passed uninterpreted. However, if the es-
cape character (described when kibitz starts) is issued, the user may
talk directly to the kibitz interpreter. Any Expect(1) or Tcl(3) com-
mands may be given. Also, job control may be used while in the inter-
preter, to, for example, suspend or restart kibitz.
Various processes can provide various effects. For example, you can
emulate a two-way write(1) session with the command:
kibitz user2 sleep 1000000
ARGUMENTS
kibitz takes arguments, these should also be separated by whitespace.
The -noproc flag runs kibitz with no process underneath. Characters
are passed to the other kibitz. This is particularly useful for con-
necting multiple interactive processes together. In this mode, charac-
ters are not echoed back to the typist.
-noescape disables the escape character.
-escape char sets the escape character. The default escape character
is ^].
-silent turns off informational messages describing what kibitz is do-
ing to initiate a connection.
-tty ttyname defines the tty to which the invitation should be sent.
If you start kibitz to user2 on a remote computer, kibitz performs a
rlogin to the remote computer with your current username. The flag
-proxy username causes rlogin to use username for the remote login
(e.g. if your account on the remote computer has a different username).
If the -proxy flag is not given, kibitz tries to determine your current
username by (in that order) inspecting the environment variables USER
and LOGNAME, then by using the commands whoami and logname.
The arguments -noescape and -escape can also be given by user2 when
prompted to run kibitz.
MORE THAN TWO USERS
The current implementation of kibitz explicitly understands only two
users, however, it is nonetheless possible to have a three (or more)
-way kibitz, by kibitzing another kibitz. For example, the following
command runs kibitz with the current user, user2, and user3:
% kibitz user2 kibitz user3
Additional users may be added by simply appending more "kibitz user"
commands.
The xkibitz script is similar to kibitz but supports the ability to add
additional users (and drop them) dynamically.
CAVEATS
kibitz assumes the 2nd user has the same terminal type and size as the
1st user. If this assumption is incorrect, graphical programs may dis-
play oddly.
kibitz handles character graphics, but cannot handle bitmapped graph-
ics. Thus,
% xterm -e kibitz will work
% kibitz xterm will not work
However, you can get the effect of the latter command by using xkibitz
(see SEE ALSO below). kibitz uses the same permissions as used by
rlogin, rsh, etc. Thus, you can only kibitz to users at hosts for
which you can rlogin. Similarly, kibitz will prompt for a password on
the remote host if rlogin would.
If you kibitz to users at remote hosts, kibitz needs to distinguish
your prompt from other things that may precede it during login. (Ide-
ally, the end of it is preferred but any part should suffice.) If you
have an unusual prompt, set the environment variable EXPECT_PROMPT to
an egrep(1)-style regular expression. Brackets should be preceded with
one backslash in ranges, and three backslashes for literal brackets.
The default prompt r.e. is "($|%|#) ".
kibitz requires the kibitz program on both hosts. kibitz requires ex-
pect(1).
By comparison, the xkibitz script uses the X authorization mechanism
for inter-host communication so it does not need to login, recognize
your prompt, or require kibitz on the remote host. It does however
need permission to access the other X servers.
BUGS
An early version of Sun's tmpfs had a bug in it that causes kibitz to
blow up. If kibitz reports "error flushing ...: Is a directory" ask
Sun for patch #100174.
If your Expect is not compiled with multiple-process support (i.e., you
do not have a working select or poll), you will not be able to run kib-
itz.
ENVIRONMENT
The environment variable SHELL is used to determine the shell to start,
if no other program is given on the command line.
If the environment variable EXPECT_PROMPT exists, it is taken as a reg-
ular expression which matches the end of your login prompt (but does
not otherwise occur while logging in). See also CAVEATS above.
If the environment variables USER or LOGNAME are defined, they are used
to determine the current user name for a kibitz to a remote computer.
See description of the -proxy option in ARGUMENTS above.
SEE ALSO
Tcl(3), libexpect(3), xkibitz(1)
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
"Kibitz - Connecting Multiple Interactive Programs Together", by Don
Libes, Software - Practice & Experience, John Wiley & Sons, West Sus-
sex, England, Vol. 23, No. 5, May, 1993.
AUTHOR
Don Libes, National Institute of Standards and Technology
kibitz is in the public domain. NIST and I would appreciate credit if
this program or parts of it are used.
19 October 1994 KIBITZ(1)
lpunlock
root@kali:~# lpunlock -h
spawn ed /etc/printcap
multixterm
Drive multiple xterms separately or together
root@kali:~# man multixterm
MULTIXTERM(1) General Commands Manual MULTIXTERM(1)
NAME
multixterm - drive multiple xterms separately or together
SYNOPSIS
multixterm [ args ]
DESCRIPTION
Multixterm creates multiple xterms that can be driven together or sepa-
rately.
In its simplest form, multixterm is run with no arguments and commands
are interactively entered in the first entry field. Press return (or
click the "new xterm" button) to create a new xterm running that com-
mand.
Keystrokes in the "stdin window" are redirected to all xterms started
by multixterm. xterms may be driven separately simply by focusing on
them.
The stdin window must have the focus for keystrokes to be sent to the
xterms. When it has the focus, the color changes to aquamarine. As
characters are entered, the color changes to green for a second. This
provides feedback since characters are not echoed in the stdin window.
Typing in the stdin window while holding down the alt or meta keys
sends an escape character before the typed characters. This provides
support for programs such as emacs.
ARGUMENTS
-xa The optional -xa argument indicates arguments to pass to
xterm.
-xc The optional -xc argument indicates a command to be run in
each named xterm (see -xn). With no -xc argument, the com-
mand is the current shell.
-xd The optional -xd argument indicates a directory to search
for files that will appear in the Files menu. By default,
the directory is: ~/lib/multixterm
-xf The optional -xf argument indicates a file to be read at
startup. See FILES below for more info.
-xn The optional -xn argument indicates a name for each xterm.
This name will also be substituted for any %n in the command
argument (see -xc).
-xv The optional -xv flag puts multixterm into a verbose mode
where it will describe some of the things it is doing inter-
nally. The verbose output is not intended to be understand-
able to anyone but the author.
Less common options may be changed by the startup file (see FILES be-
low).
All the usual X and wish flags are supported (i.e., -display, -name).
There are so many of them that to avoid colliding and make them easy to
remember, all the multixterm flags begin with -x.
If any arguments do not match the flags above, the remainder of the
command line is made available for user processing. By default, the
remainder is used as a list of xterm names in the style of -xn. The
default behavior may be changed using the .multixtermrc file (see DOT
FILE below).
EXAMPLE COMMAND LINE ARGUMENTS
The following command line starts up two xterms using ssh to the hosts
bud and dexter.
multixterm -xc "ssh %n" bud dexter
FILES
Command files may be used to drive or initialize multixterm. The File
menu may be used to invoke other files. If files exist in the command
file directory (see -xd above), they will appear in the File menu.
Files may also be loaded by using File->Open. Any filename is accept-
able but the File->Open browser defaults to files with a .mxt suffix.
Files are written in Tcl and may change any variables or invoke any
procedures. The primary variables of interest are 'xtermCmd' which
identifies the command (see -xc) and 'xtermNames' which is a list of
names (see -xn). The procedure xtermStartAll, starts xterms for each
name in the list. Other variables and procedures may be discovered by
examining multixterm itself.
EXAMPLE FILE
The following file does the same thing as the earlier example command
line:
# start two xterms connected to bud and dexter
set xtermCmd "ssh %n"
set xtermNames {bud dexter}
xtermStartAll
DOT FILE
At startup, multixterm reads ~/.multixtermrc if present. This is simi-
lar to the command files (see FILES above) except that .multixtermrc
may not call xtermStartAll. Instead it is called implicitly, similar
to the way that it is implicit in the command line use of -xn.
The following example .multixtermrc file makes every xterm run ssh to
the hosts named on the command line.
set xtermCmd "ssh %n"
Then multixterm could be called simply:
multixterm bud dexter
If any command-line argument does not match a multixterm flag, the re-
mainder of the command line is made available to .multixtermrc in the
argv variable. If argv is non-empty when .multixtermrc returns, it is
assigned to xtermNames unless xtermNames is non-empty in which case,
the content of argv is ignored.
Commands from multixterm are evaluated early in the initialization of
multixterm. Anything that must be done late in the initialization
(such as adding additional bindings to the user interface) may be done
by putting the commands inside a procedure called "initLate".
MENUS
Except as otherwise noted, the menus are self-explanatory. Some of the
menus have dashed lines as the first entry. Clicking on the dashed
lines will "tear off" the menus.
USAGE SUGGESTION - ALIASES AND COMMAND FILES
Aliases may be used to store lengthy command-line invocations. Command
files can be also be used to store such invocations as well as provid-
ing a convenient way to share configurations.
Tcl is a general-purpose language. Thus multixterm command files can
be extremely flexible, such as loading hostnames from other programs or
files that may change from day-to-day. In addition, command files can
be used for other purposes. For example, command files may be used to
prepared common canned interaction sequences. For example, the command
to send the same string to all xterms is:
xtermSend "a particularly long string"
The File menu (torn-off) makes canned sequences particularly conve-
nient. Interactions could also be bound to a mouse button, keystroke,
or added to a menu via the .multixtermrc file.
The following .multixtermrc causes tiny xterms to tile across and down
the screen. (You may have to adjust the parameters for your screen.)
This can be very helpful when dealing with large numbers of xterms.
set yPos 0
set xPos 0
trace variable xtermArgs r traceArgs
proc traceArgs {args} {
global xPos yPos
set ::xtermArgs "-geometry 80x12+$xPos+$yPos -font 6x10"
if {$xPos} {
set xPos 0
incr yPos 145
if {$yPos > 800} {set yPos 0}
} else {
set xPos 500
}
}
The xtermArgs variable in the code above is the variable corresponding
to the -xa argument.
xterms can be also be created directly. The following command file
creates three xterms overlapped horizontally:
set xPos 0
foreach name {bud dexter hotdog} {
set ::xtermArgs "-geometry 80x12+$xPos+0 -font 6x10"
set ::xtermNames $name
xtermStartAll
incr xPos 300
}
USAGE SUGGESTION - SELECTING HOSTS BY NICKNAME
The following .multixtermrc shows an example of changing the default
handling of the arguments from hostnames to a filename containing host-
names:
set xtermNames [exec cat $argv]
The following is a variation, retrieving the host names from the yp
database:
set xtermNames [exec ypcat $argv]
The following hardcodes two sets of hosts, so that you can call multix-
term with either "cluster1" or "cluster2":
switch $argv {
cluster1 {
set xtermNames "bud dexter"
}
cluster2 {
set xtermNames "frank hotdog weiner"
}
}
COMPARE/CONTRAST
It is worth comparing multixterm to xkibitz. Multixterm connects a
separate process to each xterm. xkibitz connects the same process to
each xterm.
LIMITATIONS
Multixterm provides no way to remotely control scrollbars, resize, and
most other window system related functions.
Because xterm has no mechanism for propagating size information to ex-
ternal processes, particularly for character graphic applications
(e.g., vi, emacs), you may have to manually ensure that the spawned
process behind each xterm has the correct size. For example, if you
create or set the xterm to a size, you may have to send an explicit
stty command with the correct size to the spawned process(es). Alter-
natively, you can add the correct size argument when an xterm is cre-
ated (i.e., "-geometry 80x20").
Multixterm can only control new xterms that multixterm itself has
started.
As a convenience, the File menu shows a limited number of files. To
show all the files, use File->Open.
FILES
$DOTDIR/.multixtermrc initial command file
~/.multixtermrc fallback command file
~/lib/multixterm/ default command file directory
BUGS
If multixterm is killed using an uncatchable kill, the xterms are not
killed. This appears to be a bug in xterm itself.
Send/expect sequences can be done in multixterm command files. How-
ever, due to the richness of the possibilities, to document it properly
would take more time than the author has at present.
REQUIREMENTS
Requires Expect 5.36.0 or later.
Requires Tk 8.3.3 or later.
VERSION
This man page describes version 1.8 of multixterm.
The latest version of multixterm is available from http://ex-
pect.nist.gov/example/multixterm . If your version of Expect and Tk
are too old (see REQUIREMENTS above), download a new version of Expect
from http://expect.nist.gov
DATE
April 30, 2002
AUTHOR
Don Libes <[email protected]>
LICENSE
Multixterm is in the public domain; however the author would appreciate
acknowledgement if multixterm or parts of it or ideas from it are used.
16 August 2002 MULTIXTERM(1)
passmass
Change password on multiple machines
root@kali:~# man passmass
PASSMASS(1) General Commands Manual PASSMASS(1)
NAME
passmass - change password on multiple machines
SYNOPSIS
passmass [ host1 host2 host3 ... ]
INTRODUCTION
Passmass changes a password on multiple machines. If you have accounts
on several machines that do not share password databases, Passmass can
help you keep them all in sync. This, in turn, will make it easier to
change them more frequently.
When Passmass runs, it asks you for the old and new passwords. (If you
are changing root passwords and have equivalencing, the old password is
not used and may be omitted.)
Passmass understands the "usual" conventions. Additional arguments may
be used for tuning. They affect all hosts which follow until another
argument overrides it. For example, if you are known as "libes" on
host1 and host2, but "don" on host3, you would say:
passmass host1 host2 -user don host3
Arguments are:
-user
User whose password will be changed. By default, the cur-
rent user is used.
-rlogin
Use rlogin to access host. (default)
-slogin
Use slogin to access host.
-ssh
Use ssh to access host.
-telnet
Use telnet to access host.
-program
Next argument is a program to run to set the password. De-
fault is "passwd". Other common choices are "yppasswd" and
"set passwd" (e.g., VMS hosts). A program name such as
"password fred" can be used to create entries for new ac-
counts (when run as root).
-prompt
Next argument is a prompt suffix pattern. This allows the
script to know when the shell is prompting. The default is
"# " for root and "% " for non-root accounts.
-timeout
Next argument is the number of seconds to wait for re-
sponses. Default is 30 but some systems can be much slower
logging in.
-su
Next argument is 1 or 0. If 1, you are additionally
prompted for a root password which is used to su after log-
ging in. root's password is changed rather than the user's.
This is useful for hosts which do not allow root to log in.
HOW TO USE
The best way to run Passmass is to put the command in a one-line shell
script or alias. Whenever you get a new account on a new machine, add
the appropriate arguments to the command. Then run it whenever you
want to change your passwords on all the hosts.
CAVEATS
Using the same password on multiple hosts carries risks. In particu-
lar, if the password can be stolen, then all of your accounts are at
risk. Thus, you should not use Passmass in situations where your pass-
word is visible, such as across a network which hackers are known to
eavesdrop.
On the other hand, if you have enough accounts with different pass-
words, you may end up writing them down somewhere - and that can be a
security problem. Funny story: my college roommate had an 11"x13"
piece of paper on which he had listed accounts and passwords all across
the Internet. This was several years worth of careful work and he car-
ried it with him everywhere he went. Well one day, he forgot to remove
it from his jeans, and we found a perfectly blank sheet of paper when
we took out the wash the following day!
SEE ALSO
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
AUTHOR
Don Libes, National Institute of Standards and Technology
7 October 1993 PASSMASS(1)
rlogin-cwd
root@kali:~# rlogin-cwd -h
spawn rlogin -h
rlogin: invalid option -- 'h'
rlogin: Unknown option!
Usage: rlogin [-46v] [-l user] [-p port] [user@]host
timed-read
timed-run
root@kali:~# timed-run -h
usage: spawn [spawn-args] program [program-args]
while executing
"spawn"
("eval" body line 1)
invoked from within
"eval spawn [lrange $argv 1 end]"
(file "/usr/bin/timed-run" line 12)
tknewsbiff
Pop up a window when news appears
root@kali:~# man tknewsbiff
TKNEWSBIFF(1) General Commands Manual TKNEWSBIFF(1)
NAME
tknewsbiff - pop up a window when news appears
SYNOPSIS
tknewsbiff [ server or config-file ]
INTRODUCTION
tknewsbiff pops up a window when there is unread news in your favorite
newsgroups and removes the window after you've read the news. tknewsb-
iff can optionally play a sound, start your newsreader, etc.
SELECTING NEWSGROUPS
By default, the configuration file ~/.tknewsbiff describes how tknewsb-
iff behaves. The syntax observes the usual Tcl rules - however, even
if you don't know Tcl, all but the most esoteric configurations will be
obvious.
Each newsgroup (or set of newsgroups) to be watched is described by us-
ing the "watch" command. For example:
watch dc.dining
watch nist.*
watch comp.unix.wizard -threshold 3
watch *.sources.* -threshold 20
For each newsgroup pattern, any newsgroup that matches it and which you
are subscribed to (according to your newsrc file) is eligible for re-
porting. By default, tknewsbiff reports on the newsgroup if there is
at least one unread article. The "-threshold" flag changes the thresh-
old to the following number. For example, "-threshold 3" means there
must be at least three articles unread before tknewsbiff will report
the newsgroup.
If no watch commands are given (or no configuration file exists), all
groups which are subscribed to are watched.
To suppress newsgroups that would otherwise be reported, use the "ig-
nore" command. For example, the following matches all comp.* and
nist.* newgroups except for nist.posix or .d (discussion) groups:
watch comp.*
watch nist.*
ignore nist.posix.*
ignore *.d
The flag "-new" describes a command to be executed when the newsgroup
is first reported as having unread news. For example, the following
lines invoke the UNIX command "play" to play a sound.
watch dc.dining -new "exec play /usr/local/sounds/yumyum.au"
watch rec.auto* -new "exec play /usr/local/sounds/vroom.au"
You can cut down on the verbosity of actions by defining procedures.
For example, if you have many -new flags that all play sound files, you
could define a sound procedure. This would allow the -new specifica-
tion to be much shorter.
proc play {sound} {
exec play /usr/local/sounds/$sound.au
}
watch dc.dining -new "play yumyum"
watch rec.auto* -new "play vroom"
As an aside, you can put an "&" at the end of an "exec" command to get
commands to execute asynchronously. However, it's probably not a good
idea to do this when playing sound files anyway.
"newsgroup" is a read-only variable which contains the name of the
newsgroup that is being reported. This is useful when the action is
triggered by a pattern. For example, the following line could run the
newsgroup name through a speech synthesizer:
watch * -new {
exec play herald.au
exec speak "New news has arrived in $newsgroup."
}
The flag "-display" describes a command to be executed every time the
newsgroup is reported as having unread news. The special command "dis-
play" is the default command. It schedules $newsgroup to be written to
tknewsbiff's display when it is rewritten. For example, by explicitly
providing a -display flag that omits the display command, you can dis-
able the display of newsgroups that are already reported via -new.
watch dc.dining -new {exec play yumyum.au} -display {}
If you want to execute an action repeatedly and still display the news-
group in the default manner, explicitly invoke the display command via
the -display flag. For example:
watch *security* -display {
exec play red-alert.au
display
}
Actions associated with the -new and -display flags are executed only
once for each matching newsgroup. The command executed is the one as-
sociated with the first pattern in the configuration file that matches
and observes the given threshold.
Any command that is simply listed in the configuration file is executed
each time before the update loop in tknewsbiff. The reserved (but
user-defined) procedure "user" is run immediately after the newsgroups
are scheduled to be written to the display and before they are actually
written.
For example, suppose unread articles appear in several rec.auto groups
and you play the same sound for each one. To prevent playing the sound
several times in a row, make the -new command simply set a flag. In
the user procedure, play the sound if the flag is set (and then reset
the flag).
The user procedure could also be used to start a newsreader. This
would avoid the possibility of starting multiple newsreaders just be-
cause multiple newsgroups contained unread articles. (A check should,
of course, be made to make sure that a newsreader is not already run-
ning.)
MORE VARIABLES
The following example lines show variables that can affect the behavior
of tknewsbiff
set delay 120
set server news.nist.gov
set server_timeout 60
set newsrc ~/.newsrc
set width 40
set height 20
set active_file /usr/news/lib/active
tknewsbiff alternates between checking for unread news and sleeping
(kind of like many undergraduates). The "delay" variable describes how
many seconds to sleep.
The "server" variable names an NNTP news-server. The default is
"news". The "server" variable is only used if the "active_file" vari-
able is not set.
The "server_timeout" variable describes how how many seconds to wait
for a response from the server before giving up. -1 means wait forever
or until the server itself times out. The default is 60 seconds.
The "newsrc" variable describes the name of your .newsrc file. By de-
fault, tknewsbiff looks in your home directory for a newsrc file. A
server-specific newsrc is used if found. For example, if you have set
server to "cubit.nist.gov", then tknewsbiff looks for ~/.newsrc-cu-
bit.nist.gov. (This is the Emacs gnus convention - which is very con-
venient when you read news from multiple servers.) If there is no
server-specific newsrc, tknewsbiff uses ~/.newsrc.
The "width" variable describes the width that tknewsbiff will use to
display information. If any newsgroup names are long enough, they will
be truncated so that the article counts can still be shown. You can
manually resize the window to see what was truncated. However, if your
configuration file sets the width variable, the window will be restored
to that size the next time that tknewsbiff checks for unread news and
updates its display.
The "height" variable describes the maximum height that tknewsbiff will
use to display information. If fewer newsgroups are reported, tknewsb-
iff will shrink the window appropriately. You can manually resize the
window but if your configuration file sets the height variable, the
window will be restored to that size the next time that tknewsbiff
checks for unread news and updates its display.
The "active_file" variable describes the name of the news active file.
If set, the active file is read directly in preference to using NNTP
(even if the "server" variable is set). This is particularly useful
for testing out new configuration files since you can edit a fake ac-
tive file and then click button 2 to immediately see how tknewsbiff re-
sponds (see BUTTONS below).
If the environment variable DOTDIR is set, then its value is used as a
directory in which to find all dotfiles instead of from the home direc-
tory. In particular, this affects the tknewsbiff configuration file
and the .newsrc file (assuming the newsrc variable is not set explic-
itly).
WATCHING DIFFERENT NEWS SERVERS
To watch multiple servers, run tknewsbiff multiple times. (Since you
need different .newsrc files and the servers have different newsgroups
and article numbers anyway, there is no point in trying to do this in a
single process.)
You can point tknewsbiff at a different server with an appropriate ar-
gument. The argument is tried both as a configuration file name and as
a suffix to the string "~/.tknewsbiff-". So if you want to watch the
server "kidney", store the tknewsbiff configuration information in
~/.tknewsbiff-kidney". The following two commands will both use that
configuration file.
tknewsbiff kidney
tknewsbiff ~/.tknewsbiff-kidney
In both cases, the actual server to contact is set by the value of the
server variable in the configuration file.
If no configuration file is found, the argument is used as the server
to contact. This allows tknewsbiff to be run with no preparation what-
soever.
If the argument is the special keyword "active" (or ends in "/active"),
it is used as the name of an active file. This is in turn used to ini-
tialize the variable "active_file" so that tknewsbiff reads from the
active file directly rather than using NNTP.
Creating your own active file is a convenient way of testing your con-
figuration file. For example, after running the following command, you
can repeatedly edit your active file and trigger the update-now command
(either by pressing button 2 or setting the delay variable very low) to
see how tknewsbiff responds.
The active file must follow the format of a real active file. The for-
mat is one newsgroup per line. After the newsgroup name is the number
of the highest article, the lowest article. Lastly is the letter y or
m. m means the newsgroup is moderated. y means posting is allowed.
WINDOW
When unread news is found, a window is popped up. The window lists the
names of the newsgroups and the number of unread articles in each (un-
less suppressed by the -display flag). When there is no longer any un-
read news, the window disappears (although the process continues to
run).
BUTTONS
Button or key bindings may be assigned by bind commands. Feel free to
change them. The default bind commands are:
bind .list <1> help
bind .list <2> update-now
bind .list <3> unmapwindow
By default button 1 (left) is bound to "help". The help command causes
tknewsbiff to pop up a help window.
By default, button 2 (middle) is bound to "update-now". The update-now
command causes tknewsbiff to immediately check for unread news. If
your news server is slow or maintains a very large number of news-
groups, or you have a large number of patterns in your configuration
file, tknewsbiff can take considerable time before actually updating
the window.
By default, button 3 (right) is bound to "unmapwindow". The unmapwin-
dow command causes tknewsbiff to remove the window from the display un-
til the next time it finds unread news. (The mapwindow command causes
tknewsbiff to restore the window.)
As an example, here is a binding to pop up an xterm and run rn when you
hold down the shift key and press button 1 in the listing window.
bind .list <Shift-1> {
exec xterm -e rn &
}
Here is a similar binding. However it tells rn to look only at the
newsgroup that is under the mouse when you pressed it. (The "dis-
play_list" variable is described later in this man page.)
bind .list <Shift-1> {
exec xterm -e rn [lindex $display_list [.list nearest %y]] &
}
OTHER COMMANDS AND VARIABLES
Built-in commands already mentioned are: watch, ignore, display, help,
update-now, unmapwindow, and mapwindow.
Any Tcl and Tk command can also be given. In particular, the list of
newsgroups is stored in the list widget ".list", and the scroll bar is
stored in the scrollbar widget ".scroll". So for example, if you want
to change the foreground and background colors of the newsgroup list,
you can say:
.list config -bg honeydew1 -fg orchid2
These can also be controlled by the X resource database as well. How-
ever, the configuration file allows arbitrarily complex commands to be
evaluated rather than simple assignments.
Certain Tcl/Tk commands can disrupt proper function of tknewsbiff.
These will probably be obvious to anyone who knows enough to give these
commands in the first place. As a simple example, the program assumes
the font in the list box is of fixed width. The newsgroups will likely
not align if you use a variable-width font.
The following variables are accessible and can be used for esoteric
uses. All other variables are private. Private variables and commands
begin with "_" so you don't need to worry about accidental collisions.
The array "db" is a database which maintains information about read and
unread news. db($newsgroup,hi) is the highest article that exists.
db($newsgroup,seen) is the highest article that you have read.
A number of lists maintain interesting information. "active_list" is a
list of known newsgroups. "seen_list" is a list of newsgroups that
have been seen so far as the -new and -display flags are being
processed. "previous_seen_list" is "seen_list" from the previous cy-
cle. "ignore_list" is the list of newsgroup patterns to ignore.
"watch_list" is the list of newsgroup patterns to watch. "dis-
play_list" is the list of newsgroup will be displayed at the next op-
portunity.
UPDATING YOUR FILES
tknewsbiff automatically rereads your configuration file each time it
wakes up to check for unread news. To force tknewsbiff to reread the
file immediately (such as if you are testing a new configuration or
have just modified your newsrc file), press button 2 in the display
(see BUTTONS above).
CAVEATS
tknewsbiff defines the number of unread articles as the highest exist-
ing article minus the highest article that you've read. So if you've
read the last article in the newsgroup but no others, tknewsbiff thinks
there are no unread articles. (It's impossible to do any better by
reading the active file and it would be very time consuming to do this
more accurately via NNTP since servers provide no efficient way of re-
porting their own holes in the newsgroups.) Fortunately, this defini-
tion is considered a feature by most people. It allows you to read ar-
ticles and then mark them "unread" but not have tknewsbiff continue
telling you that they are unread.
UNWARRANTED CONCERNS
Your news administrator may wonder if many people using tknewsbiff se-
verely impact an NNTP server. In fact, the impact is negligible even
when the delay is very low. To gather all the information it needs,
tknewsbiff uses a single NNTP query - it just asks for the active file.
The NNTP server does no computation, formatting, etc, it just sends the
file. All the interesting processing happens locally in the tknewsbiff
program itself.
BUGS
The man page is longer than the program.
SEE ALSO
"Exploring Expect: A Tcl-Based Toolkit for Automating Interactive Pro-
grams" by Don Libes, O'Reilly and Associates, January 1995.
AUTHOR
Don Libes, National Institute of Standards and Technology
1 January 1994 TKNEWSBIFF(1)
tkpasswd
unbuffer
Unbuffer output
root@kali:~# unbuffer -h
bad flag "-h": must be -console, -ignore, -leaveopen, -noecho, -nottycopy, -nottyinit, -open, or -pty
while executing
"spawn -noecho -h"
("eval" body line 1)
invoked from within
"eval [list spawn -noecho] $argv"
invoked from within
"if {[string compare [lindex $argv 0] "-p"] == 0} {
# pipeline
set stty_init "-echo"
eval [list spawn -noecho] [lrange $argv 1 end]
clo..."
(file "/usr/bin/unbuffer" line 13)
xkibitz
Allow multiple people to interact in an xterm
root@kali:~# xkibitz -h
bad flag "-h": must be -console, -ignore, -leaveopen, -noecho, -nottycopy, -nottyinit, -open, or -pty
while executing
"spawn -noecho -h"
("eval" body line 1)
invoked from within
"eval spawn -noecho $argv"
invoked from within
"if {[llength $argv]>0} {
eval spawn -noecho $argv
} else {
spawn -noecho $env(SHELL)
}"
(file "/usr/bin/xkibitz" line 201)
xpstat
tcl-expect
Expect is a tool for automating interactive applications according to a script. Following the script, Expect knows what can be expected from a program and what the correct response should be. Expect is also useful for testing these same applications. And by adding Tk, you can also wrap interactive applications in X11 GUIs. An interpreted language provides branching and high-level control structures to direct the dialogue. In addition, the user can take control and interact directly when desired, afterward returning control to the script.
This package contains the library and Tcl package Expect.
Installed size: 271 KB
How to install: sudo apt install tcl-expect
Dependencies:
- libc6
- libtcl8.6
tcl-expect-dev
Expect is a tool for automating interactive applications according to a script. Following the script, Expect knows what can be expected from a program and what the correct response should be. Expect is also useful for testing these same applications. And by adding Tk, you can also wrap interactive applications in X11 GUIs. An interpreted language provides branching and high-level control structures to direct the dialogue. In addition, the user can take control and interact directly when desired, afterward returning control to the script.
This package contains the development files.
Installed size: 118 KB
How to install: sudo apt install tcl-expect-dev
Dependencies:
- tcl-expect
- tcl8.6-dev
Updated on: 2024-Feb-26