Packages and Binaries:

python3-impacket

Impacket is a collection of Python3 classes focused on providing access to network packets. Impacket allows Python3 developers to craft and decode network packets in simple and consistent manner. It includes support for low-level protocols such as IP, UDP and TCP, as well as higher-level protocols such as NMB and SMB.

Impacket is highly effective when used in conjunction with a packet capture utility or package such as Pcapy. Packets can be constructed from scratch, as well as parsed from raw data. Furthermore, the object oriented API makes it simple to work with deep protocol hierarchies.

Installed size: 6.66 MB
How to install: sudo apt install python3-impacket

impacket-netview

root@kali:~# impacket-netview -h
Impacket v0.11.0 - Copyright 2023 Fortra

usage: netview.py [-h] [-user USER] [-users USERS] [-target TARGET]
                  [-targets TARGETS] [-noloop] [-delay DELAY]
                  [-max-connections MAX_CONNECTIONS] [-ts] [-debug]
                  [-hashes LMHASH:NTHASH] [-no-pass] [-k] [-aesKey hex key]
                  [-dc-ip ip address]
                  identity

positional arguments:
  identity              [domain/]username[:password]

options:
  -h, --help            show this help message and exit
  -user USER            Filter output by this user
  -users USERS          input file with list of users to filter to output for
  -target TARGET        target system to query info from. If not specified
                        script will run in domain mode.
  -targets TARGETS      input file with targets system to query info from (one
                        per line). If not specified script will run in domain
                        mode.
  -noloop               Stop after the first probe
  -delay DELAY          seconds delay between starting each batch probe
                        (default 10 seconds)
  -max-connections MAX_CONNECTIONS
                        Max amount of connections to keep opened (default
                        1000)
  -ts                   Adds timestamp to every logging output
  -debug                Turn DEBUG output ON

authentication:
  -hashes LMHASH:NTHASH
                        NTLM hashes, format is LMHASH:NTHASH
  -no-pass              don't ask for password (useful for -k)
  -k                    Use Kerberos authentication. Grabs credentials from
                        ccache file (KRB5CCNAME) based on target parameters.
                        If valid credentials cannot be found, it will use the
                        ones specified in the command line
  -aesKey hex key       AES key to use for Kerberos Authentication (128 or 256
                        bits)
  -dc-ip ip address     IP Address of the domain controller. If ommited it use
                        the domain part (FQDN) specified in the target
                        parameter

impacket-rpcdump

root@kali:~# impacket-rpcdump -h
Impacket v0.11.0 - Copyright 2023 Fortra

usage: rpcdump.py [-h] [-debug] [-target-ip ip address]
                  [-port [destination port]] [-hashes LMHASH:NTHASH]
                  target

Dumps the remote RPC enpoints information via epmapper.

positional arguments:
  target                [[domain/]username[:password]@]<targetName or address>

options:
  -h, --help            show this help message and exit
  -debug                Turn DEBUG output ON

connection:
  -target-ip ip address
                        IP Address of the target machine. If ommited it will
                        use whatever was specified as target. This is useful
                        when target is the NetBIOS name and you cannot resolve
                        it
  -port [destination port]
                        Destination port to connect to RPC Endpoint Mapper

authentication:
  -hashes LMHASH:NTHASH
                        NTLM hashes, format is LMHASH:NTHASH

impacket-samrdump

root@kali:~# impacket-samrdump -h
Impacket v0.11.0 - Copyright 2023 Fortra

usage: samrdump.py [-h] [-csv] [-ts] [-debug] [-dc-ip ip address]
                   [-target-ip ip address] [-port [destination port]]
                   [-hashes LMHASH:NTHASH] [-no-pass] [-k] [-aesKey hex key]
                   target

This script downloads the list of users for the target system.

positional arguments:
  target                [[domain/]username[:password]@]<targetName or address>

options:
  -h, --help            show this help message and exit
  -csv                  Turn CSV output
  -ts                   Adds timestamp to every logging output
  -debug                Turn DEBUG output ON

connection:
  -dc-ip ip address     IP Address of the domain controller. If ommited it use
                        the domain part (FQDN) specified in the target
                        parameter
  -target-ip ip address
                        IP Address of the target machine. If ommited it will
                        use whatever was specified as target. This is useful
                        when target is the NetBIOS name and you cannot resolve
                        it
  -port [destination port]
                        Destination port to connect to SMB Server

authentication:
  -hashes LMHASH:NTHASH
                        NTLM hashes, format is LMHASH:NTHASH
  -no-pass              don't ask for password (useful for -k)
  -k                    Use Kerberos authentication. Grabs credentials from
                        ccache file (KRB5CCNAME) based on target parameters.
                        If valid credentials cannot be found, it will use the
                        ones specified in the command line
  -aesKey hex key       AES key to use for Kerberos Authentication (128 or 256
                        bits)

impacket-secretsdump

root@kali:~# impacket-secretsdump -h
Impacket v0.11.0 - Copyright 2023 Fortra

usage: secretsdump.py [-h] [-ts] [-debug] [-system SYSTEM] [-bootkey BOOTKEY]
                      [-security SECURITY] [-sam SAM] [-ntds NTDS]
                      [-resumefile RESUMEFILE] [-outputfile OUTPUTFILE]
                      [-use-vss] [-rodcNo RODCNO] [-rodcKey RODCKEY]
                      [-use-keylist]
                      [-exec-method [{smbexec,wmiexec,mmcexec}]]
                      [-just-dc-user USERNAME] [-ldapfilter LDAPFILTER]
                      [-just-dc] [-just-dc-ntlm] [-pwd-last-set]
                      [-user-status] [-history] [-hashes LMHASH:NTHASH]
                      [-no-pass] [-k] [-aesKey hex key] [-keytab KEYTAB]
                      [-dc-ip ip address] [-target-ip ip address]
                      target

Performs various techniques to dump secrets from the remote machine without
executing any agent there.

positional arguments:
  target                [[domain/]username[:password]@]<targetName or address>
                        or LOCAL (if you want to parse local files)

options:
  -h, --help            show this help message and exit
  -ts                   Adds timestamp to every logging output
  -debug                Turn DEBUG output ON
  -system SYSTEM        SYSTEM hive to parse
  -bootkey BOOTKEY      bootkey for SYSTEM hive
  -security SECURITY    SECURITY hive to parse
  -sam SAM              SAM hive to parse
  -ntds NTDS            NTDS.DIT file to parse
  -resumefile RESUMEFILE
                        resume file name to resume NTDS.DIT session dump (only
                        available to DRSUAPI approach). This file will also be
                        used to keep updating the session's state
  -outputfile OUTPUTFILE
                        base output filename. Extensions will be added for
                        sam, secrets, cached and ntds
  -use-vss              Use the VSS method instead of default DRSUAPI
  -rodcNo RODCNO        Number of the RODC krbtgt account (only avaiable for
                        Kerb-Key-List approach)
  -rodcKey RODCKEY      AES key of the Read Only Domain Controller (only
                        avaiable for Kerb-Key-List approach)
  -use-keylist          Use the Kerb-Key-List method instead of default
                        DRSUAPI
  -exec-method [{smbexec,wmiexec,mmcexec}]
                        Remote exec method to use at target (only when using
                        -use-vss). Default: smbexec

display options:
  -just-dc-user USERNAME
                        Extract only NTDS.DIT data for the user specified.
                        Only available for DRSUAPI approach. Implies also
                        -just-dc switch
  -ldapfilter LDAPFILTER
                        Extract only NTDS.DIT data for specific users based on
                        an LDAP filter. Only available for DRSUAPI approach.
                        Implies also -just-dc switch
  -just-dc              Extract only NTDS.DIT data (NTLM hashes and Kerberos
                        keys)
  -just-dc-ntlm         Extract only NTDS.DIT data (NTLM hashes only)
  -pwd-last-set         Shows pwdLastSet attribute for each NTDS.DIT account.
                        Doesn't apply to -outputfile data
  -user-status          Display whether or not the user is disabled
  -history              Dump password history, and LSA secrets OldVal

authentication:
  -hashes LMHASH:NTHASH
                        NTLM hashes, format is LMHASH:NTHASH
  -no-pass              don't ask for password (useful for -k)
  -k                    Use Kerberos authentication. Grabs credentials from
                        ccache file (KRB5CCNAME) based on target parameters.
                        If valid credentials cannot be found, it will use the
                        ones specified in the command line
  -aesKey hex key       AES key to use for Kerberos Authentication (128 or 256
                        bits)
  -keytab KEYTAB        Read keys for SPN from keytab file

connection:
  -dc-ip ip address     IP Address of the domain controller. If ommited it use
                        the domain part (FQDN) specified in the target
                        parameter
  -target-ip ip address
                        IP Address of the target machine. If omitted it will
                        use whatever was specified as target. This is useful
                        when target is the NetBIOS name and you cannot resolve
                        it

impacket-wmiexec

root@kali:~# impacket-wmiexec -h
Impacket v0.11.0 - Copyright 2023 Fortra

usage: wmiexec.py [-h] [-share SHARE] [-nooutput] [-ts] [-silentcommand]
                  [-debug] [-codec CODEC] [-shell-type {cmd,powershell}]
                  [-com-version MAJOR_VERSION:MINOR_VERSION]
                  [-hashes LMHASH:NTHASH] [-no-pass] [-k] [-aesKey hex key]
                  [-dc-ip ip address] [-A authfile] [-keytab KEYTAB]
                  target [command ...]

Executes a semi-interactive shell using Windows Management Instrumentation.

positional arguments:
  target                [[domain/]username[:password]@]<targetName or address>
  command               command to execute at the target. If empty it will
                        launch a semi-interactive shell

options:
  -h, --help            show this help message and exit
  -share SHARE          share where the output will be grabbed from (default
                        ADMIN$)
  -nooutput             whether or not to print the output (no SMB connection
                        created)
  -ts                   Adds timestamp to every logging output
  -silentcommand        does not execute cmd.exe to run given command (no
                        output)
  -debug                Turn DEBUG output ON
  -codec CODEC          Sets encoding used (codec) from the target's output
                        (default "utf-8"). If errors are detected, run
                        chcp.com at the target, map the result with https://do
                        cs.python.org/3/library/codecs.html#standard-encodings
                        and then execute wmiexec.py again with -codec and the
                        corresponding codec
  -shell-type {cmd,powershell}
                        choose a command processor for the semi-interactive
                        shell
  -com-version MAJOR_VERSION:MINOR_VERSION
                        DCOM version, format is MAJOR_VERSION:MINOR_VERSION
                        e.g. 5.7

authentication:
  -hashes LMHASH:NTHASH
                        NTLM hashes, format is LMHASH:NTHASH
  -no-pass              don't ask for password (useful for -k)
  -k                    Use Kerberos authentication. Grabs credentials from
                        ccache file (KRB5CCNAME) based on target parameters.
                        If valid credentials cannot be found, it will use the
                        ones specified in the command line
  -aesKey hex key       AES key to use for Kerberos Authentication (128 or 256
                        bits)
  -dc-ip ip address     IP Address of the domain controller. If ommited it use
                        the domain part (FQDN) specified in the target
                        parameter
  -A authfile           smbclient/mount.cifs-style authentication file. See
                        smbclient man page's -A option.
  -keytab KEYTAB        Read keys for SPN from keytab file