Tool Documentation:
mitmproxy Usage Example
Run mitmproxy listening (p) on port2139.
root@kali:~# mitmproxy -p 2139
Packages and Binaries:
mitmproxy
mitmproxy is an interactive man-in-the-middle proxy for HTTP and HTTPS. It provides a console interface that allows traffic flows to be inspected and edited on the fly.
Also shipped is mitmdump, the command-line version of mitmproxy, with the same functionality but without the frills. Think tcpdump for HTTP.
Features:
- intercept and modify HTTP and HTTPS requests and responses and modify them on the fly
- save HTTP conversations for later replay and analysis
- replay the client-side of an HTTP conversation
- reverse proxy mode to forward traffic to a specified server
- transparent proxy mode on OSX and Linux
- make scripted changes to HTTP traffic using Python
- SSL/TLS certificates for interception are generated on the fly
- …
This package contains the python-pathod module (previously provided by other source package). The python-netlib module was also included but it has been dropped by upstream in version 1.0.
Installed size: 3.75 MB
How to install: sudo apt install mitmproxy
Dependencies:
- dpkg
- fonts-font-awesome
- python3
- python3-aioquic
- python3-asgiref
- python3-brotli
- python3-certifi
- python3-cryptography
- python3-flask
- python3-h11
- python3-h2
- python3-hyperframe
- python3-kaitaistruct
- python3-ldap3
- python3-mitmproxy-rs
- python3-mitmproxy-wireguard
- python3-msgpack
- python3-openssl
- python3-passlib
- python3-pkg-resources
- python3-protobuf
- python3-publicsuffix2
- python3-pyparsing
- python3-pyperclip
- python3-ruamel.yaml
- python3-sortedcontainers
- python3-tornado
- python3-typing-extensions | python3-supported-min
- python3-urwid
- python3-wsproto
- python3-zstandard
mitmdump
root@kali:~# mitmdump -h
usage: mitmdump [options] [filter]
positional arguments:
filter_args Filter expression, equivalent to setting both the
view_filter and save_stream_filter options.
options:
-h, --help show this help message and exit
--version show version number and exit
--options Show all options and their default values
--commands Show all commands and their signatures
--set option[=value] Set an option. When the value is omitted, booleans are
set to true, strings and integers are set to None (if
permitted), and sequences are emptied. Boolean values
can be true, false or toggle. Sequences are set using
multiple invocations to set for the same option.
-q, --quiet Quiet.
-v, --verbose Increase log verbosity.
--mode MODE, -m MODE The proxy server type(s) to spawn. Can be passed
multiple times. Mitmproxy supports "regular" (HTTP),
"transparent", "socks5", "reverse:SPEC",
"upstream:SPEC", and "wireguard[:PATH]" proxy servers.
For reverse and upstream proxy modes, SPEC is host
specification in the form of "http[s]://host[:port]".
For WireGuard mode, PATH may point to a file
containing key material. If no such file exists, it
will be created on startup. You may append
`@listen_port` or `@listen_host:listen_port` to
override `listen_host` or `listen_port` for a specific
proxy mode. Features such as client playback will use
the first mode to determine which upstream server to
use. May be passed multiple times.
--no-anticache
--anticache Strip out request headers that might cause the server
to return 304-not-modified.
--no-showhost
--showhost Use the Host header to construct URLs for display.
--rfile PATH, -r PATH
Read flows from file.
--scripts SCRIPT, -s SCRIPT
Execute a script. May be passed multiple times.
--stickycookie FILTER
Set sticky cookie filter. Matched against requests.
--stickyauth FILTER Set sticky auth filter. Matched against requests.
--save-stream-file PATH, -w PATH
Stream flows to file as they arrive. Prefix path with
+ to append. The full path can use python strftime()
formating, missing directories are created as needed.
A new file is opened every time the formatted string
changes.
--no-anticomp
--anticomp Try to convince servers to send us un-compressed data.
--flow-detail LEVEL The display detail level for flows in mitmdump: 0
(quiet) to 4 (very verbose). 0: no output 1: shortened
request URL with response status code 2: full request
URL with response status code and HTTP headers 3: 2 +
truncated response content, content of WebSocket and
TCP messages 4: 3 + nothing is truncated
Proxy Options:
--listen-host HOST Address to bind proxy server(s) to (may be overridden
for individual modes, see `mode`).
--listen-port PORT, -p PORT
Port to bind proxy server(s) to (may be overridden for
individual modes, see `mode`). By default, the port is
mode-specific. The default regular HTTP proxy spawns
on port 8080.
--no-server, -n
--server Start a proxy server. Enabled by default.
--ignore-hosts HOST Ignore host and forward all traffic without processing
it. In transparent mode, it is recommended to use an
IP address (range), not the hostname. In regular mode,
only SSL traffic is ignored and the hostname should be
used. The supplied value is interpreted as a regular
expression and matched on the ip or the hostname. May
be passed multiple times.
--allow-hosts HOST Opposite of --ignore-hosts. May be passed multiple
times.
--tcp-hosts HOST Generic TCP SSL proxy mode for all hosts that match
the pattern. Similar to --ignore-hosts, but SSL
connections are intercepted. The communication
contents are printed to the log in verbose mode. May
be passed multiple times.
--upstream-auth USER:PASS
Add HTTP Basic authentication to upstream proxy and
reverse proxy requests. Format: username:password.
--proxyauth SPEC Require proxy authentication. Format: "username:pass",
"any" to accept any user/pass combination, "@path" to
use an Apache htpasswd file, or "ldap[s]:url_server_ld
ap[:port]:dn_auth:password:dn_subtree[?search_filter_k
ey=...]" for LDAP authentication.
--no-rawtcp
--rawtcp Enable/disable raw TCP connections. TCP connections
are enabled by default.
--no-http2
--http2 Enable/disable HTTP/2 support. HTTP/2 support is
enabled by default.
SSL:
--certs SPEC SSL certificates of the form "[domain=]path". The
domain may include a wildcard, and is equal to "*" if
not specified. The file at path is a certificate in
PEM format. If a private key is included in the PEM,
it is used, else the default key in the conf dir is
used. The PEM file should contain the full certificate
chain, with the leaf certificate as the first entry.
May be passed multiple times.
--cert-passphrase PASS
Passphrase for decrypting the private key provided in
the --cert option. Note that passing cert_passphrase
on the command line makes your passphrase visible in
your system's process list. Specify it in config.yaml
to avoid this.
--no-ssl-insecure
--ssl-insecure, -k Do not verify upstream server SSL/TLS certificates.
Client Replay:
--client-replay PATH, -C PATH
Replay client requests from a saved file. May be
passed multiple times.
Server Replay:
--server-replay PATH, -S PATH
Replay server responses from a saved file. May be
passed multiple times.
--no-server-replay-kill-extra
--server-replay-kill-extra
Kill extra requests during replay (for which no
replayable response was found).[Deprecated, prefer to
use server_replay_extra='kill']
--server-replay-extra {forward,kill,204,400,404,500}
Behaviour for extra requests during replay for which
no replayable response was found. Setting a numeric
string value will return an empty HTTP response with
the respective status code.
--no-server-replay-reuse
--server-replay-reuse
Don't remove flows from server replay state after use.
This makes it possible to replay same response
multiple times.
--no-server-replay-refresh
--server-replay-refresh
Refresh server replay responses by adjusting date,
expires and last-modified headers, as well as
adjusting cookie expiration.
Map Remote:
--map-remote PATTERN, -M PATTERN
Map remote resources to another remote URL using a
pattern of the form "[/flow-filter]/url-
regex/replacement", where the separator can be any
character. May be passed multiple times.
Map Local:
--map-local PATTERN Map remote resources to a local file using a pattern
of the form "[/flow-filter]/url-regex/file-or-
directory-path", where the separator can be any
character. May be passed multiple times.
Modify Body:
--modify-body PATTERN, -B PATTERN
Replacement pattern of the form "[/flow-
filter]/regex/[@]replacement", where the separator can
be any character. The @ allows to provide a file path
that is used to read the replacement string. May be
passed multiple times.
Modify Headers:
--modify-headers PATTERN, -H PATTERN
Header modify pattern of the form "[/flow-
filter]/header-name/[@]header-value", where the
separator can be any character. The @ allows to
provide a file path that is used to read the header
value string. An empty header-value removes existing
header-name headers. May be passed multiple times.
mitmproxy
root@kali:~# mitmproxy -h
usage: mitmproxy [options]
options:
-h, --help show this help message and exit
--version show version number and exit
--options Show all options and their default values
--commands Show all commands and their signatures
--set option[=value] Set an option. When the value is omitted, booleans are
set to true, strings and integers are set to None (if
permitted), and sequences are emptied. Boolean values
can be true, false or toggle. Sequences are set using
multiple invocations to set for the same option.
-q, --quiet Quiet.
-v, --verbose Increase log verbosity.
--mode MODE, -m MODE The proxy server type(s) to spawn. Can be passed
multiple times. Mitmproxy supports "regular" (HTTP),
"transparent", "socks5", "reverse:SPEC",
"upstream:SPEC", and "wireguard[:PATH]" proxy servers.
For reverse and upstream proxy modes, SPEC is host
specification in the form of "http[s]://host[:port]".
For WireGuard mode, PATH may point to a file
containing key material. If no such file exists, it
will be created on startup. You may append
`@listen_port` or `@listen_host:listen_port` to
override `listen_host` or `listen_port` for a specific
proxy mode. Features such as client playback will use
the first mode to determine which upstream server to
use. May be passed multiple times.
--no-anticache
--anticache Strip out request headers that might cause the server
to return 304-not-modified.
--no-showhost
--showhost Use the Host header to construct URLs for display.
--rfile PATH, -r PATH
Read flows from file.
--scripts SCRIPT, -s SCRIPT
Execute a script. May be passed multiple times.
--stickycookie FILTER
Set sticky cookie filter. Matched against requests.
--stickyauth FILTER Set sticky auth filter. Matched against requests.
--save-stream-file PATH, -w PATH
Stream flows to file as they arrive. Prefix path with
+ to append. The full path can use python strftime()
formating, missing directories are created as needed.
A new file is opened every time the formatted string
changes.
--no-anticomp
--anticomp Try to convince servers to send us un-compressed data.
--console-layout {horizontal,single,vertical}
Console layout.
--no-console-layout-headers
--console-layout-headers
Show layout component headers
Proxy Options:
--listen-host HOST Address to bind proxy server(s) to (may be overridden
for individual modes, see `mode`).
--listen-port PORT, -p PORT
Port to bind proxy server(s) to (may be overridden for
individual modes, see `mode`). By default, the port is
mode-specific. The default regular HTTP proxy spawns
on port 8080.
--no-server, -n
--server Start a proxy server. Enabled by default.
--ignore-hosts HOST Ignore host and forward all traffic without processing
it. In transparent mode, it is recommended to use an
IP address (range), not the hostname. In regular mode,
only SSL traffic is ignored and the hostname should be
used. The supplied value is interpreted as a regular
expression and matched on the ip or the hostname. May
be passed multiple times.
--allow-hosts HOST Opposite of --ignore-hosts. May be passed multiple
times.
--tcp-hosts HOST Generic TCP SSL proxy mode for all hosts that match
the pattern. Similar to --ignore-hosts, but SSL
connections are intercepted. The communication
contents are printed to the log in verbose mode. May
be passed multiple times.
--upstream-auth USER:PASS
Add HTTP Basic authentication to upstream proxy and
reverse proxy requests. Format: username:password.
--proxyauth SPEC Require proxy authentication. Format: "username:pass",
"any" to accept any user/pass combination, "@path" to
use an Apache htpasswd file, or "ldap[s]:url_server_ld
ap[:port]:dn_auth:password:dn_subtree[?search_filter_k
ey=...]" for LDAP authentication.
--no-rawtcp
--rawtcp Enable/disable raw TCP connections. TCP connections
are enabled by default.
--no-http2
--http2 Enable/disable HTTP/2 support. HTTP/2 support is
enabled by default.
SSL:
--certs SPEC SSL certificates of the form "[domain=]path". The
domain may include a wildcard, and is equal to "*" if
not specified. The file at path is a certificate in
PEM format. If a private key is included in the PEM,
it is used, else the default key in the conf dir is
used. The PEM file should contain the full certificate
chain, with the leaf certificate as the first entry.
May be passed multiple times.
--cert-passphrase PASS
Passphrase for decrypting the private key provided in
the --cert option. Note that passing cert_passphrase
on the command line makes your passphrase visible in
your system's process list. Specify it in config.yaml
to avoid this.
--no-ssl-insecure
--ssl-insecure, -k Do not verify upstream server SSL/TLS certificates.
Client Replay:
--client-replay PATH, -C PATH
Replay client requests from a saved file. May be
passed multiple times.
Server Replay:
--server-replay PATH, -S PATH
Replay server responses from a saved file. May be
passed multiple times.
--no-server-replay-kill-extra
--server-replay-kill-extra
Kill extra requests during replay (for which no
replayable response was found).[Deprecated, prefer to
use server_replay_extra='kill']
--server-replay-extra {forward,kill,204,400,404,500}
Behaviour for extra requests during replay for which
no replayable response was found. Setting a numeric
string value will return an empty HTTP response with
the respective status code.
--no-server-replay-reuse
--server-replay-reuse
Don't remove flows from server replay state after use.
This makes it possible to replay same response
multiple times.
--no-server-replay-refresh
--server-replay-refresh
Refresh server replay responses by adjusting date,
expires and last-modified headers, as well as
adjusting cookie expiration.
Map Remote:
--map-remote PATTERN, -M PATTERN
Map remote resources to another remote URL using a
pattern of the form "[/flow-filter]/url-
regex/replacement", where the separator can be any
character. May be passed multiple times.
Map Local:
--map-local PATTERN Map remote resources to a local file using a pattern
of the form "[/flow-filter]/url-regex/file-or-
directory-path", where the separator can be any
character. May be passed multiple times.
Modify Body:
--modify-body PATTERN, -B PATTERN
Replacement pattern of the form "[/flow-
filter]/regex/[@]replacement", where the separator can
be any character. The @ allows to provide a file path
that is used to read the replacement string. May be
passed multiple times.
Modify Headers:
--modify-headers PATTERN, -H PATTERN
Header modify pattern of the form "[/flow-
filter]/header-name/[@]header-value", where the
separator can be any character. The @ allows to
provide a file path that is used to read the header
value string. An empty header-value removes existing
header-name headers. May be passed multiple times.
Filters:
See help in mitmproxy for filter expression syntax.
--intercept FILTER Intercept filter expression.
--view-filter FILTER Limit the view to matching flows.
mitmweb
root@kali:~# mitmweb -h
usage: mitmweb [options]
options:
-h, --help show this help message and exit
--version show version number and exit
--options Show all options and their default values
--commands Show all commands and their signatures
--set option[=value] Set an option. When the value is omitted, booleans are
set to true, strings and integers are set to None (if
permitted), and sequences are emptied. Boolean values
can be true, false or toggle. Sequences are set using
multiple invocations to set for the same option.
-q, --quiet Quiet.
-v, --verbose Increase log verbosity.
--mode MODE, -m MODE The proxy server type(s) to spawn. Can be passed
multiple times. Mitmproxy supports "regular" (HTTP),
"transparent", "socks5", "reverse:SPEC",
"upstream:SPEC", and "wireguard[:PATH]" proxy servers.
For reverse and upstream proxy modes, SPEC is host
specification in the form of "http[s]://host[:port]".
For WireGuard mode, PATH may point to a file
containing key material. If no such file exists, it
will be created on startup. You may append
`@listen_port` or `@listen_host:listen_port` to
override `listen_host` or `listen_port` for a specific
proxy mode. Features such as client playback will use
the first mode to determine which upstream server to
use. May be passed multiple times.
--no-anticache
--anticache Strip out request headers that might cause the server
to return 304-not-modified.
--no-showhost
--showhost Use the Host header to construct URLs for display.
--rfile PATH, -r PATH
Read flows from file.
--scripts SCRIPT, -s SCRIPT
Execute a script. May be passed multiple times.
--stickycookie FILTER
Set sticky cookie filter. Matched against requests.
--stickyauth FILTER Set sticky auth filter. Matched against requests.
--save-stream-file PATH, -w PATH
Stream flows to file as they arrive. Prefix path with
+ to append. The full path can use python strftime()
formating, missing directories are created as needed.
A new file is opened every time the formatted string
changes.
--no-anticomp
--anticomp Try to convince servers to send us un-compressed data.
Mitmweb:
--no-web-open-browser
--web-open-browser Start a browser.
--web-port PORT Web UI port.
--web-host HOST Web UI host.
Proxy Options:
--listen-host HOST Address to bind proxy server(s) to (may be overridden
for individual modes, see `mode`).
--listen-port PORT, -p PORT
Port to bind proxy server(s) to (may be overridden for
individual modes, see `mode`). By default, the port is
mode-specific. The default regular HTTP proxy spawns
on port 8080.
--no-server, -n
--server Start a proxy server. Enabled by default.
--ignore-hosts HOST Ignore host and forward all traffic without processing
it. In transparent mode, it is recommended to use an
IP address (range), not the hostname. In regular mode,
only SSL traffic is ignored and the hostname should be
used. The supplied value is interpreted as a regular
expression and matched on the ip or the hostname. May
be passed multiple times.
--allow-hosts HOST Opposite of --ignore-hosts. May be passed multiple
times.
--tcp-hosts HOST Generic TCP SSL proxy mode for all hosts that match
the pattern. Similar to --ignore-hosts, but SSL
connections are intercepted. The communication
contents are printed to the log in verbose mode. May
be passed multiple times.
--upstream-auth USER:PASS
Add HTTP Basic authentication to upstream proxy and
reverse proxy requests. Format: username:password.
--proxyauth SPEC Require proxy authentication. Format: "username:pass",
"any" to accept any user/pass combination, "@path" to
use an Apache htpasswd file, or "ldap[s]:url_server_ld
ap[:port]:dn_auth:password:dn_subtree[?search_filter_k
ey=...]" for LDAP authentication.
--no-rawtcp
--rawtcp Enable/disable raw TCP connections. TCP connections
are enabled by default.
--no-http2
--http2 Enable/disable HTTP/2 support. HTTP/2 support is
enabled by default.
SSL:
--certs SPEC SSL certificates of the form "[domain=]path". The
domain may include a wildcard, and is equal to "*" if
not specified. The file at path is a certificate in
PEM format. If a private key is included in the PEM,
it is used, else the default key in the conf dir is
used. The PEM file should contain the full certificate
chain, with the leaf certificate as the first entry.
May be passed multiple times.
--cert-passphrase PASS
Passphrase for decrypting the private key provided in
the --cert option. Note that passing cert_passphrase
on the command line makes your passphrase visible in
your system's process list. Specify it in config.yaml
to avoid this.
--no-ssl-insecure
--ssl-insecure, -k Do not verify upstream server SSL/TLS certificates.
Client Replay:
--client-replay PATH, -C PATH
Replay client requests from a saved file. May be
passed multiple times.
Server Replay:
--server-replay PATH, -S PATH
Replay server responses from a saved file. May be
passed multiple times.
--no-server-replay-kill-extra
--server-replay-kill-extra
Kill extra requests during replay (for which no
replayable response was found).[Deprecated, prefer to
use server_replay_extra='kill']
--server-replay-extra {forward,kill,204,400,404,500}
Behaviour for extra requests during replay for which
no replayable response was found. Setting a numeric
string value will return an empty HTTP response with
the respective status code.
--no-server-replay-reuse
--server-replay-reuse
Don't remove flows from server replay state after use.
This makes it possible to replay same response
multiple times.
--no-server-replay-refresh
--server-replay-refresh
Refresh server replay responses by adjusting date,
expires and last-modified headers, as well as
adjusting cookie expiration.
Map Remote:
--map-remote PATTERN, -M PATTERN
Map remote resources to another remote URL using a
pattern of the form "[/flow-filter]/url-
regex/replacement", where the separator can be any
character. May be passed multiple times.
Map Local:
--map-local PATTERN Map remote resources to a local file using a pattern
of the form "[/flow-filter]/url-regex/file-or-
directory-path", where the separator can be any
character. May be passed multiple times.
Modify Body:
--modify-body PATTERN, -B PATTERN
Replacement pattern of the form "[/flow-
filter]/regex/[@]replacement", where the separator can
be any character. The @ allows to provide a file path
that is used to read the replacement string. May be
passed multiple times.
Modify Headers:
--modify-headers PATTERN, -H PATTERN
Header modify pattern of the form "[/flow-
filter]/header-name/[@]header-value", where the
separator can be any character. The @ allows to
provide a file path that is used to read the header
value string. An empty header-value removes existing
header-name headers. May be passed multiple times.
Filters:
See help in mitmproxy for filter expression syntax.
--intercept FILTER Intercept filter expression.
Updated on: 2024-Mar-11